Stop Shooting - Canon POWERSHOT 1000 HS User Manual

Microphone
Magnifying the subject while shooting
Pressing the zoom lever while shooting will zoom in on or out from the subject.
However, operation sounds will be recorded.
When the mode switch is set to A, the icon for the determined scene
will appear (p. 163). "When Moving" icons and "With Strong Facial
Shadows" icons will not appear, however. Under certain conditions, the
icon that appears may not match the actual scene.
• If you change the composition while shooting so the optimum white
balance is not possible, press the Movie button to stop recording, then
start recording again. (only when the movie quality is fixed at
• Movies can be shot by pressing the movie button even when the mode
switch is in positions other than A (p. 97).
When the mode switch is set to E, you can set each setting for shooting
•
movies (p. 97).
Estimated Shooting Times
Memory Card
Shooting Time
• Shooting times are based on default settings.
• Maximum clip length is approx. 10 minutes.
• Recording may stop even if the maximum clip length has not been reached on some
memory cards. SD Speed Class 6 or higher memory cards are recommended.
●
Do not touch the microphone while
shooting.
●
Do not press any buttons other than the
movie button while shooting. The sound the
buttons make will be recorded in the movie.

Stop shooting.

●
Press the movie button again.
The camera will beep twice and stop
shooting the movie.
The movie will record to the memory card.
Shooting will automatically stop when the
memory card fills.
4 GB
14 min. 34 sec.
Shooting Movies
(p. 101))
16 GB
59 min. 40 sec.
31