Charging The Battery - Canon POWERSHOT 220 HS User Manual

Charging the Battery
Number of Possible Shots
The number of shots that can be taken is based on the Camera & Imaging Products
Association (CIPA) measurement standard.
Under some shooting conditions, the number of shots that can be taken may be less
than mentioned above.
Battery Charge indicator
An icon or message will appear on the screen indicating the battery's charge
state.
_[_ Sufficient charge.
Slightly depleted, but sufficient.
GO (Blinking red) Nearly depleted. Charge the battery.
"Change the battery pack." Depleted. Recharge the battery.
Charge the battery on the day, or the day before, it will be used.
Charged batteries continue to discharge naturally even if they are not used.
-o=-_............ Attach the cover to a charged battery so that
the A mark is visible.
How to store the battery for long periods:
Deplete and remove the battery from the camera. Attach the terminal cover and
store the battery. Storing a battery for long periods of time (about a year) without
depleting it may shorten its life span or affect its performance.
The battery charger can also be used when abroad.
The charger can be used in regions that have 100 - 240 V (50/6g Hz) AC power.
If the plug does not fit the outlet, use a commercially available plug adapter. Do
not use electrical transformers for foreign travel as they will cause damage.
The battery may develop a bulge.
This is a normal characteristic of the battery and does not indicate a problem.
However, if the battery bulges to the point where it will no longer fit into the
camera, please contact a Canon Customer Support Help Desk.
If the battery is quickly depleted even after charging, it has reached the end of
its life span. Purchase a new battery.
15