CLEANING THE fILTER
• The dust container should be emptied and cleaned after each use.
• To clean the dust container, Hold the vacuum in a position, with the intake mouth pointing
down.
• Turn the dust container gently out.
• Empty the container If you like, you may wash it with soap and water and then dry it.
• Refit the filter into the dust container.
• If damaged, replace it with a new one.
• Then refit the dust container and place the cleaner on the Charge Base.
• Wipe the outside of the cleaner with a dry cloth. DO not clean the unit with paint thinner
or chemical solution and this will damage the unit.
DUST CONTAINER (DIRT) REMOVAL:
• Dirt in the dust contain should be emptied after each use.
• Hold vacuum cleaner with the air-intake (nozzle end)pointing downward to avoid spillage.
• Hold and turn out the Dust Container.
• Remove the Filter Bracket from the Dust Container.
• Empty, wash ,wipes and dries the interior of the Dust Container.
USING THE CLEANING ATTACHMENTS:
The Crevice tool, upholstery nozzle are provided for your usage.
• Ensure to turn off the vacuum cleaner.
• Fit the crevice tool into the mouth of dust container for cleaning of cracks and corners.
• Fit the upholstery nozzle into the mouth of the dust container for cleaning upholstery,
curtains, etc
PROBLEM
1.Battery is not charged
Unit won't work
2.The vacuum is not fixed well
to the Charge Base
Low or No
A. Weak Battery
Suction power
B. Dust container full
C. Filter is clogged
1. Dust container full
Dust Leaking
2.Dust container does not fit
from the unit
completely to the unit
TROUBLE SHOOTING
POSSIBLE CAUSE
EN - 23
POSSIBLE ANSwER
1.Charge for at least 16 hours
2.Take out the vacuum and refit
to the Charge Base
a) Recharge the battery
b)Empty dust container
c)Clean filter or replace by new one
1.Empty dust container
2. Reassemble the unit by aligning
the body of the unit and lightly fit
into place.
EN