AEG LAVAMAT 72950A3 User Manual page 29

Problem
The machine vibrates or is noisy:
Spinning starts late or the machine does not
spin:
The machine makes an unusual noise:
No water is visible in the drum:
The display shows the alarm code
Possible cause/Solution
The transit bolts and packing have not been re-
moved.
• Check the correct installation of the appli-
ance.
The support feet have not been adjusted
• Check the correct levelling of the appliance.
The laundry is not evenly distributed in the
drum.
• Redistribute the laundry.
Maybe there is very little laundry in the drum.
• Load more laundry.
The electronic unbalance detection device has
cut in because the laundry is not evenly distrib-
uted in the drum. The laundry is redistributed
by reverse rotation of the drum. This may hap-
pen several times before the unbalance disap-
pears and normal spinning can resume. If, after
some minutes, the laundry is still not evenly
distributed in the drum, the machine will not
spin.
• The laundry load is perhaps to little, add more
items, redistribute the load manually and
then select the spinning programme.
The machine is fitted with a type of motor which
makes an unusual noise compared with other
traditional motors. This new motor ensures a
softer start and more even distribution of the
laundry in the drum when spinning, as well as
increased stability of the machine.
Machines based on modern technology operate
very economically using very little water with-
out affecting performance.
Anti-flooding system has activated.
• Disconnect the appliance, close the water tap
:
and contact the Service Force Centre.
29
What to do if...