Panasonic Strada CY-RC50KU Operating Instructions Manual page 17

ording to the installation instructions for the connected devices.
Connection to a Car Navigation System (example)
Reverse lead
(Violet/white stripe)
Cut off the end terminal
and connect to the clip
connector.
Rear view camera – RCA conversion cable
(supplied with CN-NVD905U)
Connection to a Car Monitor (example)
Reverse extension cord
(Violet/white stripe)
Reverse lead
(Violet/white stripe)
Connect to the wire of the reverse lamp (lamp with a transparent lens, which
lights for reversing) which lights when the vehicle shift lever is moved to reverse (R).
Clip connector
(supplied with
Reverse lamp
CN-NVD905U)
Car Navigation System
(CN-NVD905U: option)
Connect to the wire of the reverse lamp (lamp with a transparent lens, which
lights for reversing) which lights when the vehicle shift lever is moved to reverse (R).
Reverse lamp
Clip connector
In-Dash Monitor
(CQ-VD7005U: option)
Camera input terminal
(Yellow)
CAMERA-IN
Clip connector
1 A
Reverse lead
(Violet/white stripe)
Rear view camera
control unit
RCA cord
(Yellow)
(6 m)
Clip connector
1 A
Reverse lead
(Violet/white stripe)
Rear view camera
control unit
RCA cord
(Yellow) (6 m)
Transmission
P
＋ −
R
N
D
L
2
Battery
Ground lead
Car chassis
(Black)
Rear view camera
(Yellow)
(4 m)
Transmission
P
＋ −
R
N
D
L
2
Battery
Ground lead
Car chassis
(Black)
Rear view camera
(Yellow)
(4 m)