Osd Initial Language Settings - Optional; Initial Setting The Area Code - Optional; Adjusting The General Settings - LG HT304SU-A0 Manual

HT304SU-A0_DARELL_ENG_4504 2/6/09

OSD Initial language settings - Optional

During the first use of this unit, the initial language setup menu
appears on your TV screen. You must complete initial language
selection before using the unit. English will be selected as the initial
language.
1 Turn the power on
The language list appears
2 Select the language
3 Press
4 To confirm press

Initial Setting the Area Code - Optional

When you use this unit for the first time, you have to set the Area
Code as shown below.
1 Display setup menu
2 Select LOCK menu on the first level
3 Move to second level
The activated Area Code appears on the
second level.
4 Move to the third level
5 Enter a new password
6 Recheck the entered new password
7 Select a code for a geographic area
After select, Rating and Password will be
activated. (page 16)
8 To confirm what you press
Make sure to finish setting the Area Code
before leaving the setup menu if you cannot
set the rating and Password
8:09 PM Page 7

Adjusting the general settings

1 Display setup menu
2 Select a desired option on the first level
ON REMOTE 3 Move to the second level
4 Select a desired option on the second level
POWER
5 Move to the third level
U U u u I I i i
6 Change the setting
ENTER
I I i i and ENTER
Adjusting the general settings
- more you can do
Adjusting the language settings
ON REMOTE
Menu Language – Select a language for the Setup menu and on-screen
SETUP display.
U U u u Disc Audio/ Disc Subtitle/ Disc Menu – Select a language for the Disc Audio/
Disc Subtitle/ Disc Menu.
[Original] : Refers to the original language in which the disc was recorded.
[Other] : To select another language, press number buttons then ENTER to
i i
enter the corresponding 4-digit number according to the language code list in
i i
the reference chapter (see page 16). If you make a mistake before pressing
numerical buttons ENTER, press CLEAR.
[Off] (for Disc Subtitle) : Turn off Subtitle.
(0-9) and ENTER
numerical buttons
(0-9) and ENTER
U U u u I I and
ENTER
ENTER
ON REMOTE
SETUP
U U u u
i i
U U u u
i i
U U u u , ENTER
7