Page 1
User's Guide Mode d'emploi Guida per l'utente Benutzerhandbuch Guía del usuario Manual do Utilizador Gebruikershandleiding Руководство пользователя KDL-22PX300...
Table of contents Preparation Part names ... 3 Connecting digital audio equipment ... 5 Connecting the controller... 5 Turning the built-in PlayStation Games Playing a game ... 7 Using Memory Cards... 10 Audio CDs Playing an audio CD ... 12 DVDs Watching a DVD...
Preparation Part names Built-in PlayStation 2 front Connect to Description 1 MEMORY CARD slot Insert a memory card ( 2 Controller port 1/2 Insert the Analog Controller (DUALSHOCK®2) into a controller port of the PlayStation page 5). Connect to USB connector 4 Disc cover 5 OPEN button 6 "/1 (on/standby)/...
Page 4
Built-in PlayStation 2 rear Connect to Description You can enjoy online games by connecting the PlayStation page 34). Hint To enjoy "BRAVIA" home network features, connect to LAN of the TV using an Ethernet cable page 34). Part names Connect to 2 DIGITAL AUDIO OUT (OPTICAL) 2 to a broadband network...
Connecting digital audio equipment By using a commercially available optical digital cable, you can enjoy surround sound with the effect of being in a movie theatre or a concert hall. When connecting the built-in PlayStation 2 to audio equipment with digital connectors, refer to the instructions supplied with the device to be connected.
Page 6
Turning the built-in PlayStation 2 on and off Press PlayStation 2 POWER ON on the TV's remote to turn on the TV and the PlayStation automatically switched to PlayStation Hints • When you turn the TV off, the PlayStation functions below are activated, the PlayStation conjunction with the TV.
Games Playing a game Before playing a game Check that the connections to the TV and audio equipment are correct and that the precautions have been met. • "Connecting the controller" ( page 5) Hint To play online games, you first need to connect to and set up a network. See "Connecting to a network"...
Page 8
To reset a game Press the \/1 (on/standby)/RESET button on the built-in PlayStation front. Do not accidentally press the @/1/RESET button while playing a game, as doing so will cause the game to reset. To end a game Press the "/1 (on/standby)/RESET button on the built-in PlayStation front after saving game data, and then remove the disc ( RESET: Press once.
Button/Switch Description 5 Left analog stick/ L3 Hints button • The left analog stick and L3 button, function only in analogue mode (indicator: red). • The L3 button function when the analog stick is pressed. 6 ANALOG mode button Switch between digital mode and analogue mode. 7 Mode indicator Digital mode: Lights off.
Memory Card (8MB) (for PlayStation (SCPH-10020 E) ® Memory Card (SCPH-1020 E)* * This product is no longer manufactured. MagicGate™ is a term of copyright protection technology developed by Sony Corporation Compatible software Amount of memory PlayStation 2 format Approx. 8 MB software...
Page 11
Inserting a Memory Card Insert the Memory Card into a MEMORY CARD slot on the built-in PlayStation 2 front. Built-in PlayStation 2 front MEMORY CARD MEMORY CARD Hint Some software titles designate a specific MEMORY CARD slot to use. Refer to the instructions supplied with the software for details.
Audio CDs Playing an audio CD Playing a CD Turn on the built-in PlayStation page 7). Follow steps 1 to 3 of "Starting a game". The track numbers are displayed. Using the directional buttons, select the track number you want to play and then press the Playback begins.
Page 13
Playing in various modes You can set for "Play Mode" and "Repeat". Play Mode Normal Plays tracks as recorded on the CD Program Plays tracks in a specified order Shuffle Plays tracks in a random order Repeat Does not play the CD repeatedly Plays all tracks repeatedly Plays a track repeatedly At the Browser screen (...
DVDs Watching a DVD You can operate the DVD player using the following methods. • Using the on-screen Control Panel • Operating directly using the Analog Controller (DUALSHOCK • Using the DVD Remote Control (for PlayStation The following instructions assume use of the Control Panel to operate the DVD player.
Page 15
Icon Function Returns to the previously selected screen Return within the DVD's menu Displays and changes audio options on Audio Options DVDs with multiple audio tracks Displays and changes viewing angles on Angle Options DVDs recorded with multi-angle options Displays and changes subtitle options on Subtitle Options DVDs with subtitle options Skips to the selected title, chapter or the...
Page 16
Playing a DVD Turn on the built-in PlayStation page 7). Follow steps 1 to 3 of "Starting a game". Playback begins. Hints • If you turn on the built-in PlayStation automatically. • You can also start playback from the Browser screen ( Ending DVD playback During playback, select x in the Control Panel ( and then press the...
Page 17
Finding a particular point on a DVD (Search) You can search either forwards or backwards to quickly locate a particular point on a DVD. During playback, select in the Control Panel page 14) and then press and hold the Search speed changes as shown below when you press either the up or down directional button while holding down the •...
Selecting Original or Play List for DVD-RW playback When using a DVD-RW disc (VR mode), you can select the type of titles you want to play. With playback stopped, select page 14) and then press the Original and Play List will be selected in turn each time you press the button.
Page 19
Select the chapter number, and then press the To play all the chapters, select "All". Repeat steps 2 to 4 to set other titles or chapters. Press the START button. Program Play begins. Hint The setting will not be cleared after Program Play finishes. Shuffle Play You can set this option for random playback of all titles or chapters recorded on a disc.
Clearing playback modes Clears playback modes to allow normal playback. Select in the Control Panel ( press the button. A message stating, "Play mode contents cleared", is displayed and the built-in PlayStation 2 returns to normal playback. Hint If multiple playback modes have been set in a combination, all playback modes are cleared.
Page 21
Select the desired setting, and then press the The setting of the item is completed. For details, see the instructions for each item ( pages 21 to 26). Hints • The default setting for each menu item is underlined in the explanations below. •...
Page 22
DNR (Digital Noise Reduction) You can use this setting to help reduce roughness in the on-screen image and produce a cleaner picture. DNR is not used. DNR1 Increases picture quality DNR2 Increases picture quality (maximum) Hints • "DNR2" is more effective for reducing image roughness than "DNR1", but in some cases an afterimage may appear.
Page 23
Setting viewer options Pause mode You can use this option to set a picture status when playback is paused. Auto A picture with moving elements is displayed without jitter. Normally select this position. Frame A picture without moving elements can be displayed at high resolution. Parental Control In some regions, the viewing of some DVD content may be restricted based on viewer age or other factors.
Page 24
Region code list To enter a Parental Control region code, select "Other" in step 4 of "Setting Parental Control" ( page 23). Use the directional buttons to select the first letter, and then press the right directional button. Then select the next letter and press the button.
Page 25
Setting sound options Audio Digital Out You can switch the method of outputting the audio signal when you connect the following audio devices to the DIGITAL OUT (OPTICAL) connector. Caution When the built-in PlayStation 2 is connected to an audio device without a Dolby Digital, DTS or MPEG decoder, set "Dolby Digital", "DTS"...
Page 26
Audio Track Auto Select Mode This setting gives priority to the audio track that contains the highest number of channels when you play a DVD on which multiple audio formats (PCM, Dolby Digital, DTS or MPEG) are recorded. If PCM, Dolby Digital, DTS and MPEG have the same number of channels, the built-in PlayStation 2 selects PCM, Dolby Digital, DTS and MPEG...
Main menu Displaying the main menu From the main menu, you can access information and change various settings. You can also move to the following screens from the main menu. The main menu is displayed when you turn on the built-in PlayStation without a disc inserted.
Select an icon, and then press • When you select the Memory Card icon, icons for data saved on the Memory Card are displayed. To copy or delete saved game data, see "Copying or deleting game data" ( • If you select the icon for a PlayStation software disc, the game will start.
Hints • The default setting for each menu item is underlined in the explanations below. • Changes to each setting are saved and remain in effect even after you turn off or reset the built-in PlayStation Clock Adjustment You can set the date and time. Use the directional buttons to set "Year", "Month", "Day", "Hour", "Minute"...
Remote Control You can set this option when using the DVD Remote Control (for PlayStation 2) (sold separately). Gameplay Function On Select this option when operating PlayStation PlayStation Control. Gameplay Function Off Select this option when not operating PlayStation or PlayStation Remote Control.
Using the Version Information screen You can check version information for various built-in PlayStation components by selecting this option. You can also change optional settings for some items. At the main menu ( page 27), press the The Version Information screen is displayed. Optional settings Optional settings are available for "Console", "PlayStation "DVD Player".
PlayStation Driver You can set the PlayStation Driver programme to optimise performance of PlayStation format software. Hint The settings will automatically return to the default settings in the following case: – When the built-in PlayStation 2 is turned off Disc Speed Standard Loads discs at normal speed Fast...
Page 33
Close the disc cover. Playback begins. Hint The setting will not be cleared if 1) you do not start a DVD after step 4 or 2) you reset or turn off the built-in PlayStation 2 before step 6. Using the Version Information screen...
Page 34
Networking Connecting to a network You can enjoy online games by connecting the PlayStation broadband network. To play all online games, you will need the following: • A network compatible PlayStation • Broadband Internet service • A commercially available Ethernet cable •...
Page 35
Connecting the built-in PlayStation Built-in PlayStation Network cable (not supplied) Router To network devices Network cable (not supplied) DSL Modem/Cable Modem Internet Connect the Ethernet cable to the NETWORK connector on the rear. Connect the Ethernet cable to the network device. Hints •...
Creating network settings After you have connected an Ethernet cable to the built-in PlayStation you will need to create and save network settings. To do this you need a Network Access Disc supplied by registering your PlayStation can register your PlayStation You will need the following items to create a network setting: –...
Page 37
Table des matières Préparation Noms des composants... 3 Raccordement d’équipements audio numériques ... 5 Branchement de la manette... 6 Mise sous tension et hors tension de la PlayStation intégrée ... 6 Jeux Comment jouer... 7 Utilisation des Memory Cards (Cartes Mémoire)... 11 CD audio Lecture d’un CD audio...
Page 38
Préparation Noms des composants Avant de la PlayStation 2 intégrée Connexion à Description 1 Fente pour MEMORY Insérez une Memory Card (Carte Mémoire) CARD (Carte Mémoire) page 11). 2 Port de manette 1/2 Insérez la Manette Analogique (DUALSHOCK®2) dans un port de manette de la PlayStation page 6).
Page 39
Arrière de la PlayStation Connexion à Description Vous pouvez jouer en ligne en connectant la PlayStation page 37). Conseil Pour profiter des fonctions réseau domestique « BRAVIA », connectez-vous au réseau du téléviseur à l’aide d’un câble Ethernet ( Noms des composants Connexion à...
Page 40
Raccordement d’équipements audio numériques Vous pouvez profiter du son ambiophonique grâce à un câble numérique optique commercialisé qui reproduit la qualité acoustique d’un cinéma ou d’une salle de concert. Si vous raccordez la PlayStation équipement audio à l’aide de connecteurs numériques, reportez-vous aux instructions qui accompagnent le périphérique à...
Branchement de la manette Insérez la Manette Analogique (DUALSHOCK de manette de la PlayStation Avant de la PlayStation Manette Analogique (DUALSHOCK Conseil Certains logiciels spécifient l’utilisation d’un port de manette particulier. Pour plus de détails, reportez-vous aux instructions qui accompagnent le logiciel. Branchement de la manette 2) dans un port ®...
Jeux Comment jouer Avant de jouer Vérifiez que les raccordements au téléviseur et à l’équipement audio sont corrects et que toutes les précautions ont été prises. • « Branchement de la manette » ( page 6) Conseil Pour jouer à des jeux en ligne, vous devez d’abord vous connecter à un réseau et le configurer.
Page 43
Conseils • Veillez à verrouiller le couvercle du compartiment à disque pour lire un disque. • Vous pouvez également lancer un jeu à partir de l’écran navigateur ( • Si vous mettez la PlayStation 2 intégrée sous tension après avoir inséré un disque, le jeu démarre automatiquement.
Page 44
Touche/Commutateur Description 4 Touches directionnelles 5 Joystick analogique Conseils gauche/Touche L3 • Le joystick analogique gauche et la touche L3 ne fonctionnent qu’en mode analogique (indicateur : rouge). • La touche L3 fonctionne lorsque l’utilisateur appuie sur le joystick analogique. 6 Touche de mode Bascule entre le mode numérique et le mode ANALOG (analogique)
Page 45
A propos des commandes analogiques • Lorsque vous jouez à un jeu au format PlayStation utiliser toutes les touches en mode analogique, à l’exception des touches START (mise en marche), SELECT (sélection), L3 et R3. • Lorsque vous lisez un logiciel au format PlayStation joysticks analogiques gauche et droit peuvent être utilisés en mode analogique.
* Ce produit n’est plus en fabrication. MagicGate™ est un terme qui désigne une technologie de protection des droits d’auteurs développée par Sony Corporation. Insertion d’une Memory Card (Carte Mémoire) Insérez la Memory Card (Carte Mémoire) dans une fente pour MEMORY CARD (Carte Mémoire) située à...
Page 47
Copie ou suppression de données de jeu Vous pouvez supprimer les données enregistrées ou les copier vers une autre Memory Card (Carte Mémoire). Utilisez les touches directionnelles et la touche de la manette pour sélectionner des éléments. Mettez sous tension la PlayStation qu’aucun disque n’est inséré, puis insérez une Memory Card (Carte mémoire).
CD audio Lecture d’un CD audio Lecture d’un CD Mettez la PlayStation 2 intégrée sous tension et insérez le disque ( page 7). Suivez les étapes 1 à 3 de la section « Démarrage d’un jeu ». Les numéros de plages s’affichent. A l’aide des touches directionnelles, sélectionnez le numéro de plage à...
Page 49
Lecture dans différents modes Vous pouvez sélectionner « Mode de Lecture » ou « Mode Répétition ». Mode de Lecture Lit les plages comme elles sont enregistrées sur Lecture Continue le CD Programme Lit les plages dans un ordre spécifié Lecture Lit les plages dans un ordre aléatoire Aléatoire...
Lecture d’un DVD Vous pouvez utiliser le lecteur DVD à l’aide des méthodes suivantes. • Utilisation du Panneau de commandes affiché • Fonctionnement direct à l’aide de la Manette Analogique (DUALSHOCK ® • Utilisation de la Télécommande DVD (pour PlayStation séparément) Les instructions suivantes supposent l’utilisation du Panneau de commandes pour contrôler le lecteur DVD.
Page 51
Icône Menu principal Affiche le menu des disques DVD vidéo Permet de revenir à l’écran sélectionné Retour précédemment au sein du menu du DVD Affiche et permet de changer les options Choix audio audio de DVD comportant plusieurs piste audio Affiche et permet de changer les angles de Choix d’angle de caméra de DVD enregistrés sous plusieurs...
Page 52
Conseils • Vous pouvez utiliser « » pour vérifier les options accessibles directement à l’aide des touches de la Manette Analogique. Pour accéder directement aux options à l’aide de la manette, vous devez faire disparaître le Panneau de commandes de l’écran.
Page 53
Sélectionnez une option, puis appuyez sur la touche Titre Spécifie le numéro du titre Chapitre Spécifie le numéro du chapitre C XX:XX:XX Spécifie le temps écoulé du chapitre (ou du titre) (ou T XX:XX:XX) Sélectionnez les numéros de la scène souhaitée, puis appuyez sur la touche La lecture du chapitre sélectionné...
Sélection du contenu Original ou Play List pour la lecture d’un DVD-RW Si vous utilisez un disque DVD-RW (en mode VR), vous pouvez sélectionner le type de titres que vous souhaitez lire. Une fois la lecture arrêtée, sélectionnez Panneau de commandes ( page 15), puis appuyez sur la touche Vous pouvez basculer entre les options Original et Play List en...
Page 55
Lecture programmée Vous pouvez créer des programmes de lecture de titres et de chapitres dans n’importe quel ordre. Pendant la lecture, sélectionnez commandes ( page 15), puis appuyez sur la touche Sélectionnez un numéro de programme, puis appuyez sur la touche Si aucun programme n’est défini, la seule option disponible est «...
Page 56
Lecture répétée Vous pouvez définir cette option pour lire des titres ou chapitres de manière répétée. Sélectionnez dans le Panneau de commandes page 15), puis appuyez sur la touche A chaque fois que vous appuyez sur la touche qu’illustré ci-dessous. Répétition du Lecture répétée de tous les titres disque...
Paramètres et réglages du lecteur DVD Vous pouvez utiliser le Panneau de commandes pour définir les paramètres du lecteur DVD, tels que la langue des sous-titres, la langue de la bande- son et le niveau de Contrôle parental. Conseils • Certains DVD ne prennent pas en charge tous les paramètres. La PlayStation intégrée lit le contenu du disque tel qu’il a été...
Page 58
Sélection de la langue Dans « Sélection de la langue », vous pouvez choisir la langue du menu du DVD, de la bande-son et des sous-titres. Remarquez que si vous sélectionnez une langue qui n’est pas enregistrée sur le DVD, une des langues enregistrées est sélectionnée automatiquement.
Page 59
Précision des contours Vous pouvez accentuer ou atténuer les contours de l’image affichée. Plus la valeur est élevée, plus les contours sont accentués. En règle générale, sélectionnez « 0 ». • -2 • -1 • 0 Conseil Selon le DVD, il se peut que le paramètre Précision des contours produise des résultats limités.
Page 60
Définition des options de l’afficheur Mode de pause Vous pouvez utiliser cette option pour définir l’état d’une image lorsque la lecture est suspendue. Auto Une image contenant des sujets en mouvement est affichée sans sautillement. En règle générale, sélectionnez cette position. Image Une image contenant des sujets immobiles peut être affichée en haute résolution.
Page 61
Liste des codes de région Si vous souhaitez entrer un code de région pour le Contrôle parental, sélectionnez « Autres » à l’étape 4 de la section « Réglages du Contrôle parental » ( page 25). Utilisez les touches directionnelles pour sélectionner la première lettre, puis appuyez sur la touche directionnelle droite.
Page 62
• Si vous ne définissez pas de code d’accès, vous ne pouvez pas modifier les paramètres du Contrôle parental. • Certains DVD proposant la fonction de Contrôle parental n’autorisent pas l’utilisation des modes de lecture ( pages 19 à 21). Réglage du son Sortie audio numérique Vous pouvez changer le mode de sortie des signaux audio lorsque vous...
Page 63
Sélection automatique de plage audio Ce paramètre accorde la priorité à la bande-son contenant le plus grand nombre de canaux lorsque vous lisez un DVD sur lequel sont enregistrés plusieurs formats audio (PCM, Dolby Digital, DTS ou MPEG). Si les formats PCM, Dolby Digital, DTS et MPEG possèdent le même nombre de canaux, la PlayStation 2 intégrée sélectionne les bande-son PCM,...
Menu principal Affichage du menu principal A partir du menu principal, vous pouvez accéder à des informations et modifier divers paramètres. Il permet également d’accéder aux écrans suivants. Le menu principal s’affiche lorsque vous mettez la PlayStation 2 intégrée sous tension sans avoir inséré de disque. •...
Utilisation de l’écran navigateur L’écran navigateur vous permet de réaliser les opérations suivantes : • Copie ou suppression de données de jeu sauvegardées sur une Memory Card (Carte Mémoire) • Démarrage d’un jeu • Lancement de la lecture d’un CD audio •...
Utilisation du menu Configuration du Système A partir du menu Configuration du Système, vous pouvez modifier les paramètres de nombreuses options, telles que la langue ou l’affichage de l’heure, ainsi que le mode de sortie audio ou vidéo. Affichez le menu principal ( page 29).
Page 67
Taille de l’écran Vous pouvez régler le mode d’affichage du téléviseur. Plein écran* 16:9 * Le mode d’affichage « Plein écran » est compatible avec le menu Configuration du Système, l’écran navigateur et l’écran CD audio. DIGITAL OUT (OPTICAL) Vous pouvez choisir de diffuser le signal via le connecteur DIGITAL OUT (OPTICAL).
Langue Cette option permet de sélectionner la langue d’affichage du menu principal, de l’écran navigateur, du menu Configuration du Système et de l’écran d’informations sur la version. Anglais Affiche les messages en anglais Français Affiche les messages en français Espagnol Affiche les messages en espagnol Allemand Affiche les messages en allemand...
Page 69
A l’aide des touches directionnelles, sélectionnez une option, puis appuyez sur la touche La valeur actuelle de l’option s’affiche. Sélectionnez une option, puis appuyez sur la touche Les options disponibles s’affichent. Sélectionnez le paramètre désiré, puis appuyez sur la touche Pour plus de détails, reportez-vous aux instructions relatives à...
Page 70
Pilote PlayStation Vous pouvez régler le programme Pilote PlayStation performances d’un logiciel au format PlayStation Conseil Les paramètres par défaut sont automatiquement rétablis dans le cas suivant : – Lorsque la PlayStation 2 intégrée est mise hors tension Vitesse du Disque Normale Charge les disques à...
Page 71
Refermez le couvercle du compartiment à disque. La lecture démarre. Conseil Le paramètre ne sera pas désactivé si 1) vous ne démarrez pas la lecture d’un DVD après l’étape 4 ou si 2) vous réinitialisez ou mettez hors tension la PlayStation intégrée avant l’étape 6.
Page 72
Connexion réseau Connexion au réseau Vous pouvez jouer en ligne en connectant la PlayStation large bande. Pour jouer à tous les jeux en ligne, vous devez disposer des éléments suivants : • Un jeu PlayStation 2 compatible avec le réseau •...
Page 73
Connexion de la PlayStation Câble réseau (non fourni) Routeur Vers les périphériques réseau Câble réseau (non fourni) Modem DSL/Modem câble Branchez le câble Ethernet sur le connecteur NETWORK (réseau) situé à l’arrière. Raccorder le câble Ethernet au périphérique réseau. Connexion au réseau 2 intégrée Conseils •...
Page 74
Création des paramètres réseau Lorsque vous avez raccordé un câble Ethernet à la PlayStation vous devez créer et enregistrer des paramètres de réseau. Pour cela, vous devez disposer du Disque d’accès au réseau fourni avec votre PlayStation 2. Vous pouvez enregistrer votre PlayStation Vous devez disposer des éléments suivants pour créer une configuration de réseau : –...
Page 75
Indice Preparazione Nomi di componenti ... 3 Collegamento delle apparecchiature audio digitali... 5 Collegamento del controller... 6 Accensione e spegnimento della PlayStation Giochi Riproduzione di un gioco... 7 Uso delle Memory Card... 11 CD audio Riproduzione di un CD audio ... 13 Visione di un DVD ...
Preparazione Nomi di componenti PlayStation 2 integrata - Parte anteriore Collegamento a Descrizione 1 Ingresso MEMORY Inserire una Memory Card ( CARD 1/2 2 Ingresso controller Inserire il Controller Analogico (DUALSHOCK®2) in un ingresso controller della PlayStation pagina 6). Collegamento a Connettore USB 4 Coperchio per il disco 5 Tasto OPEN...
Page 77
PlayStation 2 integrata - Parte posteriore Collegamento a Descrizione È possibile giocare in rete collegando la PlayStation pagina 37). Nota Per utilizzare le funzionalità “BRAVIA” per la rete domestica, effettuare il collegamento all’ingresso LAN del televisore utilizzando un cavo Ethernet pagina 37).
Collegamento delle apparecchiature audio digitali Utilizzando un cavo digitale ottico tra quelli disponibili in commercio, è possibile ascoltare l’audio surround come se ci si trovasse in un cinema o una sala concerti. Quando si collega la PlayStation all’apparecchiatura audio con connettori digitali, consultare le istruzioni in dotazione con il dispositivo da collegare.
Collegamento del controller Inserire il Controller Analogico (DUALSHOCK ingresso controller della PlayStation PlayStation 2 integrata - Parte anteriore Controller Analogico (DUALSHOCK ® Nota Alcuni titoli software indicano un ingresso controller specifico da usare. Fare riferimento alle istruzioni per l’uso in dotazione con il software. Collegamento del controller Accensione e spegnimento della PlayStation...
Giochi Riproduzione di un gioco Prima della riproduzione di un gioco Controllare che i collegamenti all’apparecchiatura televisiva e audio siano corretti e che siano state prese le dovute precauzioni. • “Collegamento del controller” ( pagina 6) Nota Per giocare online, è necessario prima collegare e configurare una rete. Per ulteriori informazioni, vedere “Collegamento a una rete”...
Page 81
• Se si accende la PlayStation 2 integrata dopo l’inserimento di un disco, il gioco si avvia automaticamente. Per reimpostare un gioco Premere il tasto \/1 (acceso/attesa)/RESET sul lato anteriore della PlayStation 2 integrata. Evitare di premere accidentalmente il tasto @/1/ RESET durante il gioco, in quanto facendolo il gioco ricomincerebbe da capo.
Page 82
Tasto/Interruttore Descrizione 5 Levetta analogica Note sinistra/Tasto L3 • La levetta analogica sinistra e il tasto L3 funzionano solo nella modalità analogica (spia: rossa). • Il tasto L3 funziona quando si preme la levetta analogica. 6 Tasto modalità Consente di passare tra le modalità analogica e ANALOG (analogica) digitale.
Page 83
Controlli analogici • Durante la riproduzione di un titolo software per PlayStation possibile usare tutti i tasti nella modalità analogica ad eccezione dei tasti START, SELECT, L3 e R3. • Durante la riproduzione di un titolo software per PlayStation modalità analogica possono essere utilizzate solo le levette analogiche sinistra e destra.
(SCPH-1020 E)* * Prodotto fuori produzione. MagicGate™ è un termine che designa una tecnologia di protezione del copyright sviluppata da Sony Corporation. Inserimento di una Memory Card Inserire la Memory Card nell’ingresso MEMORY CARD sulla parte anteriore della PlayStation Quantità di memoria...
Page 85
Copia o eliminazione dei dati di gioco È possibile eliminare i dati salvati o copiarli su un’altra Memory Card. Utilizzare i tasti di direzione e il tasto selezionare gli elementi. Accendere la PlayStation 2 integrata senza alcun disco inserito, quindi inserire una Memory Card. Selezionare “Browser”, quindi selezionare la Memory Card da cui si desidera copiare o eliminare dati.
CD audio Riproduzione di un CD audio Riproduzione di un CD Accendere la PlayStation 2 integrata e inserire il disco pagina 7). Seguire la procedura ai punti da 1 a 3 in “Avvio di un gioco”. Vengono visualizzati i numeri dei brani. Utilizzando i tasti direzionali, selezionare il numero del brano da riprodurre, quindi premere il tasto Inizia la riproduzione.
Page 87
Riproduzione in varie modalità È possibile impostare “Modalità di riproduzione” e “Ripetizione”. Modalità di Normale Riproduce i brani così come sono registrati sul riproduzione Programma Riproduce i brani nell’ordine specificato Casuale Riproduce i brani in ordine casuale Ripetizione Non viene effettuata la riproduzione ripetuta del Tutti Riproduce ripetutamente tutti i brani Riproduce ripetutamente un brano...
Visione di un DVD È possibile utilizzare il lettore DVD mediante i seguenti metodi. • Uso del Pannello di controllo a schermo • Uso diretto con il Controller Analogico (DUALSHOCK • Uso del Telecomando DVD (per PlayStation separatamente) Nelle seguenti istruzioni si presuppone che per il funzionamento del lettore DVD si utilizzi il Pannello di controllo.
Page 89
Icona Torna alla schermata selezionata in Ritorno precedenza nel menu del DVD Visualizza e cambia le opzioni audio sui Opzioni audio DVD con più tracce audio Visualizza e cambia gli angoli di Opzioni angolo visualizzazione sui DVD registrati con opzioni multiangolo Visualizza e cambia le opzioni per i Opzioni sottotitoli sottotitoli sui DVD con opzioni per i...
Page 90
• A seconda della modalità di riproduzione, alcune opzioni potrebbero non essere disponibili o non possono essere regolate. Riproduzione di un DVD Accendere la PlayStation 2 integrata e inserire un disco pagina 7). Seguire la procedura ai punti da 1 a 3 in “Avvio di un gioco”. Inizia la riproduzione.
Page 91
Selezionare una scelta specifica per la riproduzione Selezione di una scena per numero di capitolo Durante la riproduzione, selezionare il numero di capitolo desiderato nel Pannello di controllo ( quindi il tasto Inizia la riproduzione del capitolo selezionato. Se si desidera riprodurre un capitolo a una sola cifra (es.: 1-9), immettere uno zero iniziale.
Page 92
Visualizzazione delle informazioni sulla riproduzione È possibile visualizzare informazioni come il numero del titolo corrente o il tempo trascorso. Durante la riproduzione, selezionare controllo ( pagina 15), quindi premere il tasto La visualizzazione cambia nel modo seguente ogni volta che si preme il tasto Titolo X Capitolo X Numero del titolo e del capitolo...
Uso delle modalità di riproduzione Usando le varie modalità di riproduzione, è possibile riprodurre titoli o capitoli nell’ordine desiderato oppure riprodurre ripetutamente una scena specifica. Ci sono quattro modalità di riproduzione: • Riproduzione programmata ( pagina 20) • Riproduzione casuale ( pagina 21) •...
Page 94
Riproduzione casuale Questa opzione può essere impostata per la riproduzione casuale di tutti i titoli o i capitoli registrati su un disco. L’ordine di riproduzione sarà diverso ad ogni utilizzo della Riproduzione in ordine casuale. Selezionare nel Pannello di controllo ( quindi premere il tasto La visualizzazione cambia nel modo seguente ogni volta che si preme il tasto...
Ripetizione A-B È possibile impostare una scena specifica da ripetere in continuazione. Durante la riproduzione, selezionare controllo ( pagina 15), quindi premere il tasto in cui si desidera far iniziare la riproduzione ripetuta. Il punto iniziale (punto A) viene impostato. Premere il tasto in corrispondenza del punto in cui si desidera far terminare la riproduzione ripetuta.
Page 96
Selezionare l’opzione desiderata, quindi premere il tasto L’opzione di menu si attiva ed è selezionabile. Selezionare l’impostazione desiderata, quindi premere il tasto L’impostazione dell’opzione è completa. Per ulteriori informazioni, consultare le istruzioni per ciascuna opzione ( Note • Le impostazioni predefinite sono sottolineate nelle spiegazioni riportate di sotto. •...
Page 97
Impostazione delle opzioni di visualizzazione del televisore Nel menu Impostazione Schermo, è possibile impostare le dimensioni dello schermo (rapporto di formato) e le altre opzioni che agiscono sulla qualità delle immagini. Formato TV È possibile impostare il rapporto di formato in modo che corrisponda al formato dello schermo.
Page 98
Visualizzazione Durante la riproduzione, è possibile visualizzare le informazioni sullo stato della riproduzione nell’angolo superiore destro dello schermo, per alcuni secondi. Le informazioni sullo stato di riproduzione vengono visualizzate per alcuni secondi. Le informazioni sullo stato di riproduzione non vengono visualizzate. Scansione Progressiva È...
Page 99
Selezionare “Regione”, quindi premere il tasto Viene visualizzato l’elenco di opzioni per la regione. Selezionare la regione su cui basare il livello di Protezione visione Programmi, quindi premere il tasto Se si seleziona “Altro”, vedere “Elenco dei codici regione” pagina 26). Selezionare “Livello”, quindi premere il tasto Viene visualizzato l’elenco di opzioni del livello.
Page 100
Usando i tasti direzionali, selezionare “Modifica Codice”, quindi premere il tasto Viene visualizzata la schermata per cambiare la password. Selezionare un numero, quindi premere il tasto Ripetere le operazioni al punto 2 per una password a quattro cifre. Viene chiesto di reimmetterla per la conferma. Annullamento temporaneo delle limitazioni di Protezione visione programmi Avviare la riproduzione del DVD (...
Page 101
Impostazione delle opzioni audio USCITA AUDIO DIGITALE È possibile commutare il metodo di invio del segnale audio al momento del collegamento dei seguenti dispositivi audio al connettore DIGITAL OUT (OPTICAL). Attenzione Se la PlayStation 2 integrata è collegata a un dispositivo audio senza un decodificatore Dolby Digital, DTS o MPEG, impostare “Dolby Digital”, “DTS”...
Page 102
Selezione automatica brano Questa impostazione fornisce la priorità alla traccia audio che contiene il più elevato numero di canali quando si riproduce un DVD sul quale sono registrati più formati audio (PCM, Dolby Digital, DTS o MPEG). Se i formati PCM, Dolby Digital, DTS e MPEG hanno lo stesso numero di canali, la PlayStation 2 integrata seleziona le tracce audio PCM, Dolby Digital, DTS e MPEG in quell’ordine.
Menu principale Visualizzazione del menu principale Dal menu principale, è possibile accedere alle informazioni e cambiare le varie impostazioni. Dal menu principale è anche possibile passare alle seguenti schermate. Il menu principale viene visualizzato quando si accende la PlayStation 2 integrata senza che sia inserito alcun disco. •...
Uso della schermata Browser Dalla schermata Browser è anche possibile effettuare le seguenti operazioni: • Copiare o eliminare i dati di gioco salvati su una Memory Card • Avviare un gioco • Avviare la riproduzione di un CD audio • Avviare la riproduzione di un DVD Visualizzare il menu principale ( pagina 30).
Uso del menu Configurazione di Sistema Dal menu Configurazione di Sistema è possibile modificare le impostazioni per numerose opzioni, compresa la visualizzazione della lingua o dell’ora, il metodo di output audio o video. Visualizzare il menu principale ( Usando i tasti direzionali, selezionare “Configurazione di Sistema”, quindi premere il tasto Viene visualizzato il menu Configurazione di Sistema.
Page 106
Dimensioni Schermo È possibile impostare la modalità di visualizzazione per il televisore. Schermo Intero* 16:9 * La modalità di visualizzazione “Schermo Intero” è compatibile con il menu Configurazione di Sistema, la schermata Browser e la schermata CD audio. DIGITAL OUT (OPTICAL) È...
Lingua Questa opzione può essere utilizzata per selezionare la lingua visualizzata su menu principale, schermata Browser, menu Configurazione di Sistema e schermata delle informazioni sulla versione. Inglese Visualizza i messaggi in inglese Francese Visualizza i messaggi in francese Spagnolo Visualizza i messaggi in spagnolo Tedesco Visualizza i messaggi in tedesco Italiano...
Page 108
Selezionare un’opzione, quindi premere il tasto Vengono visualizzate le opzioni disponibili. Selezionare l’impostazione desiderata, quindi premere il tasto Per ulteriori informazioni, consultare le istruzioni per ciascuna opzione ( pagine da 35 a 36). Nota Le impostazioni predefinite sono sottolineate nelle spiegazioni riportate di sotto. Unità...
Page 109
Lettore DVD Se si imposta “Scansione Progressiva” su “On” quando la PlayStation integrata è collegata a un televisore senza le necessarie caratteristiche, la qualità dell’immagine potrebbe essere ridotta, oppure l’immagine potrebbe non essere visualizzata. L’impostazione “Scansione Progressiva” può essere rimossa attenendosi alla procedura seguente. Prima di cancellare l’impostazione, rimuovere il DVD.
Page 110
Collegamento in rete Collegamento a una rete È possibile giocare in rete collegando la PlayStation larga. Per giocare con tutti i giochi in rete, è necessario quanto segue: • Un gioco per PlayStation 2 con modalità di gioco in rete •...
Page 111
Collegamento della PlayStation Cavo di rete (non in dotazione) Router Ai dispositivi di rete Cavo di rete (non in dotazione) Modem DSL/Modem via cavo Collegare il cavo Ethernet al connettore NETWORK nella parte posteriore. Collegare il cavo Ethernet al dispositivo di rete. Collegamento a una rete 2 integrata Note...
Page 112
Creazione di impostazioni di rete Dopo aver collegato un cavo Ethernet alla PlayStation necessario creare e salvare le impostazioni di rete. A tal fine è necessario un disco di accesso alla rete in dotazione a seguito della registrazione della PlayStation 2.
Page 113
Inhalt Vorbereitungen Teile und Anschlüsse ... 3 Anschließen digitaler Audiogeräte ... 5 Anschließen des Controllers ... 6 Ein- und Ausschalten der integrierten PlayStation Spiele Spielen... 7 Die Memory Card ... 11 Audio-CDs Wiedergeben einer Audio-CD ... 13 DVDs Wiedergeben einer DVD... 15 Die verschiedenen Wiedergabemodi ...
Vorbereitungen Teile und Anschlüsse Vorderseite der integrierten PlayStation Anschluss an Beschreibung 1 MEMORY CARD- Setzen Sie eine Memory Card ein ( Steckplatz 1/2 2 Controller-Anschluss Schließen Sie den Analog Controller (DUALSHOCK®2) an einen Controller-Anschluss der PlayStation 2 an ( Anschluss an USB-Anschluss 4 Disc-Fach 5 OPEN-Taste...
Page 115
Rückseite der integrierten PlayStation Anschluss an Beschreibung Sie können Online-Spiele spielen, wenn Sie die PlayStation anschließen ( Anmerkung Verbinden Sie diesen Anschluss über ein Ethernet- Kabel mit LAN am Fernsehgerät, wenn Sie „BRAVIA“-Heimnetzwerkfunktionen nutzen möchten ( Teile und Anschlüsse Anschluss an 2 DIGITAL AUDIO OUT (OPTICAL) 2 an ein Breitband-Netzwerk...
Anschließen digitaler Audiogeräte Wenn Sie ein handelsübliches optisches Digitalkabel verwenden, können Sie Raumklang mit einer Klangwirkung wie im Kino oder Konzertsaal erzielen. Wenn Sie die integrierte PlayStation digitalen Anschlüssen anschließen, schlagen Sie auch in der Bedienungsanleitung zum anzuschließenden Gerät nach. Rückseite der integrierten PlayStation Angeschlossenes Gerät DIGITAL IN...
Anschließen des Controllers Schließen Sie den Analog Controller (DUALSHOCK Controller-Anschluss der integrierten PlayStation Vorderseite der integrierten PlayStation Analog Controller (DUALSHOCK Anmerkung Bei einigen Software-Titeln muss ein bestimmter Controller-Anschluss verwendet werden. Einzelheiten dazu schlagen Sie bitte in den mit der Software gelieferten Anweisungen nach.
Spiele Spielen Vor dem Spielen Vergewissern Sie sich, dass die Verbindungen zum Fernsehgerät und zum Audiogerät korrekt vorgenommen und die Sicherheitsmaßnahmen beachtet wurden. • „Anschließen des Controllers“ ( Seite 6) Anmerkung Wenn Sie Online-Spiele spielen wollen, müssen Sie zuerst eine Verbindung zu einem Netzwerk herstellen und dieses konfigurieren.
Page 119
• Wenn Sie die integrierte PlayStation 2 einschalten und bereits eine Disc eingelegt ist, wird das Spiel automatisch gestartet. So setzen Sie ein Spiel zurück Drücken Sie die \/1 (Ein/Standby)/RESET-Taste an der Vorderseite der integrierten PlayStation 2. Drücken Sie die @/1/RESET-Taste nicht versehentlich während eines Spiels.
Page 120
Taste/Schalter Beschreibung 5 Linker Analog-Stick/ Anmerkungen L3-Taste • Der linke Analog-Stick und die L3-Taste stehen nur im Analogmodus (Kontroll-Leuchte: rot) zur Verfügung. • Die L3-Taste funktioniert, wenn der Analog-Stick gedrückt wird. 6 ANALOG-Modustaste Damit wechseln Sie zwischen Digital- und Analogmodus. 7 Modus-Kontroll- Digitalmodus: Leuchtet nicht.
Page 121
Bedienelemente im Analogmodus • Bei der Wiedergabe eines Software-Titels im PlayStation können Sie im Analogmodus alle Tasten außer der START-, SELECT-, L3- und R3-Taste verwenden. • Bei der Wiedergabe eines Software-Titels im PlayStation können im Analogmodus nur der linke und der rechte Analog-Stick verwendet werden.
* Dieses Produkt wird nicht mehr hergestellt. MagicGate™ ist der Begriff für eine Technologie zum Schutz von Urheberrechten, die von der Sony Corporation entwickelt wurde. Einsetzen einer Memory Card Setzen Sie die Memory Card in einen MEMORY CARD-Steckplatz an der Vorderseite der integrierten PlayStation Speicherkapazität...
Page 123
Kopieren oder Löschen von Spieldaten Sie können gespeicherte Daten löschen oder Daten auf eine andere Memory Card kopieren. Mit den Richtungstasten und der am Controller treffen Sie eine Auswahl. Schalten Sie die integrierte PlayStation Disc ein und setzen Sie eine Memory Card ein. Wählen Sie „Browser“...
Audio-CDs Wiedergeben einer Audio-CD Wiedergeben einer CD Schalten Sie die integrierte PlayStation die Disc ein ( Seite 7). Gehen Sie wie in Schritt 1 bis 3 unter „Starten eines Spiels“ erläutert vor. Die Titelnummern werden angezeigt. Wählen Sie mit den Richtungstasten die Nummer des wiederzugebenden Titels aus und drücken Sie die Die Wiedergabe beginnt.
Page 125
Beenden der Audio-CD-Wiedergabe Wählen Sie mit den Richtungstasten x aus und drücken Sie dann die -Taste. Die Wiedergabe stoppt. Drücken Sie die OPEN-Taste an der Vorderseite der integrierten PlayStation herausnehmen wollen. Wiedergeben in verschiedenen Modi Sie können Einstellungen für den „Wiedergabemodus“ und für den „Wiederholungsmodus“...
DVDs Wiedergeben einer DVD Sie haben folgende Möglichkeiten, den DVD-Spieler zu bedienen. • Über das Kontrollmenü auf dem Bildschirm • Direkt über den Analog Controller (DUALSHOCK • Über die DVD-Fernbedienung (für PlayStation Bei den folgenden Anweisungen wird die Verwendung des Kontrollmenüs zum Bedienen des DVD-Spielers zugrunde gelegt.
Page 127
Symbol Zurückschalten zum zuvor ausgewählten Zurück Bildschirm im DVD-Menü Anzeigen und Ändern der Audio-Optionen Audio-Optionen auf DVDs mit mehreren Tonspuren Anzeigen und Wechseln der Blickwinkel Blickwinkel- auf DVDs, auf denen mehrere Blickwinkel Optionen aufgezeichnet sind Anzeigen und Ändern von Untertitel- Untertitel- Optionen auf DVDs mit Untertitel- Optionen...
Page 128
Anmerkungen • Mit „ “ können Sie die Optionen anzeigen lassen, auf die Sie direkt mit den Tasten des Analog Controller zugreifen können. Um mit dem Controller direkt auf die Optionen zugreifen zu können, müssen Sie zuerst das Kontrollmenü auf dem Bildschirm ausblenden.
Page 129
Auswählen einer Szene anhand der Titelnummer, Kapitelnummer oder einer Zeitangabe Wählen Sie während der Wiedergabe Seite 15) und drücken Sie die Wählen Sie eine Option aus und drücken Sie die Titel Zum Angeben der Titelnummer Kapitel Zum Angeben der Kapitelnummer C XX:XX:XX Zum Auswählen der Stelle für die Wiedergabe mittels (oder T XX:XX:XX)
Page 130
Anzeigen von Wiedergabeinformationen Sie können Informationen wie z. B. die aktuelle Titelnummer oder die Spieldauer anzeigen lassen. Wählen Sie während der Wiedergabe Seite 15) und drücken Sie die Mit jedem Drücken der -Taste wechselt die Anzeige wie im Folgenden angegeben. Titel X Kapitel X Titelnummer und Kapitelnummer...
Die verschiedenen Wiedergabemodi Mithilfe der verschiedenen Wiedergabemodi können Sie Titel oder Kapitel in der gewünschten Reihenfolge wiedergeben lassen oder die Wiedergabe einer bestimmten Szene wiederholen. Es gibt vier Wiedergabemodi: • Programm-Wiedergabe ( Seite 20) • Shuffle-Wiedergabe ( Seite 21) • Wiedergabe-Wiederholung ( Seite 21) •...
Page 132
Shuffle-Wiedergabe Mit dieser Funktion können Sie alle Titel oder Kapitel auf einer DVD in zufälliger Reihenfolge wiedergeben lassen. Die Wiedergabereihenfolge ändert sich jedes Mal, wenn die Shuffle-Wiedergabe verwendet wird. Wählen Sie im Kontrollmenü ( drücken Sie die -Taste. Mit jedem Drücken der -Taste wechselt die Anzeige wie im Folgenden angegeben.
A-B-Wiederholung Sie können eine bestimmte Szene festlegen und wiederholt wiedergeben lassen. Wählen Sie während der Wiedergabe Seite 15) und drücken Sie die der die wiederholte Wiedergabe starten soll. Damit haben Sie den Anfangspunkt (Punkt A) festgelegt. Drücken Sie die -Taste an der Stelle, an der die wiederholte Wiedergabe enden soll.
Page 134
Wählen Sie die gewünschte Option aus und drücken Sie die -Taste. Die Menüoption wird aktiviert und kann ausgewählt werden. Wählen Sie die gewünschte Einstellung aus und drücken Sie -Taste. Damit ist die Einstellung der Option vorgenommen. Weitere Informationen dazu finden Sie in den Anweisungen zu den einzelnen Optionen ( Seite 23 bis 29).
Page 135
Einstellen der Optionen für die Fernsehanzeige Im Menü „Bildschirmeinstellungen“ können Sie das Bildseitenverhältnis und andere Optionen einstellen, die die Bildqualität betreffen. TV-Gerät Sie können das Bildseitenverhältnis entsprechend dem Bildschirmformat einstellen. 16:9 Bildschirmformat: Breitbild 4:3 LETTER BOX Bildschirmformat: 4:3 Bilder im Breitbildformat werden mit Balken am oberen und unteren Bildschirmrand angezeigt.
Page 136
Anzeige Während der Wiedergabe können Sie einige Sekunden lang Informationen zum Wiedergabestatus oben rechts im Bildschirm anzeigen lassen. Die Informationen zum Wiedergabestatus werden einige Sekunden lang angezeigt. Es werden keine Informationen zum Wiedergabestatus angezeigt. Progressive-Modus Sie können ein Bild anzeigen lassen, bei dem alle Zeilen auf einmal aktualisiert werden.
Page 137
Wählen Sie eine Ziffer und drücken Sie die Geben Sie auf diese Weise alle vier Ziffern für das vierstellige Passwort ein. Wenn Sie eine Ziffer löschen wollen, drücken Sie die -Taste. Wenn Sie ein Passwort registrieren, müssen Sie es zur Bestätigung erneut eingeben.
Page 138
Ändern des Passworts Führen Sie in Schritt 2 unter „Einstellen der Kindersicherung“ Seite 25) die folgenden Schritte aus: Wählen Sie mit den Richtungstasten die Option „Passwort ändern“ und drücken Sie die -Taste. Der Bildschirm zum Ändern des Passworts wird angezeigt. Wählen Sie eine Ziffer und drücken Sie die Geben Sie auf diese Weise alle vier Ziffern für das vierstellige Passwort ein.
Page 139
Einstellen der Tonoptionen Digitaler Audio-Ausgang Sie können die Einstellung für die Ausgabe des Audiosignals wechseln, wenn Sie folgende Audiogeräte an den DIGITAL OUT (OPTICAL)- Anschluss anschließen. Vorsicht Wenn die integrierte PlayStation 2 an ein Audiogerät ohne Dolby Digital-, DTS- oder MPEG-Decoder angeschlossen wird, setzen Sie „Dolby Digital“, „DTS“...
Page 140
Autom. Auswahl von Audiotiteln Mit dieser Einstellung hat bei der Wiedergabe einer DVD mit mehreren Tonformaten (PCM, Dolby Digital, DTS oder MPEG) die Tonspur mit der höchsten Kanalanzahl Priorität. Wenn die PCM-, Dolby Digital-, DTS- und MPEG-Tonspuren dieselbe Kanalanzahl haben, wählt die integrierte PlayStation 2 die Tonspuren in der Reihenfolge PCM, Dolby Digital, DTS und MPEG aus.
Das Hauptmenü Aufrufen des Hauptmenüs Vom Hauptmenü aus können Sie auf verschiedene Informationen zugreifen und zahlreiche Einstellungen vornehmen. Sie können vom Hauptmenü aus auch zu folgenden Bildschirmen wechseln. Das Hauptmenü wird angezeigt, wenn Sie die integrierte PlayStation einschalten, ohne dass eine Disc eingelegt ist. •...
Der Browser-Bildschirm Auf dem Browser-Bildschirm stehen folgende Funktionen zur Verfügung: • Kopieren oder Löschen von auf einer Memory Card gespeicherten Spieldaten • Starten eines Spiels • Starten der Wiedergabe einer Audio-CD • Starten der Wiedergabe einer DVD Rufen Sie das Hauptmenü auf ( Seite 30).
Das „Systemkonfiguration“- Menü Vom „Systemkonfiguration“-Menü aus können Sie Einstellungen für zahlreiche Optionen, einschließlich der Sprache der Bildschirmanzeigen oder der Uhrzeitanzeige sowie Audio- oder Videoausgabemodus, vornehmen. Rufen Sie das Hauptmenü auf ( Wählen Sie mit den Richtungstasten die Option „Systemkonfiguration“ und drücken Sie die Das „Systemkonfiguration“-Menü...
Page 144
Bildschirmgröße Hier können Sie den Anzeigemodus auf Ihr Fernsehgerät einstellen. Ganzer Bildschirm* 16:9 * Der Anzeigemodus „Ganzer Bildschirm“ ist möglich beim „Systemkonfiguration“-Menü, Browser-Bildschirm und Audio-CD-Bildschirm. DIGITAL OUT (OPTICAL) Hier legen Sie fest, ob das Signal über den DIGITAL OUT (OPTICAL)- Anschluss ausgegeben wird.
Sprache Mit dieser Option können Sie die Sprache wählen, in der das Hauptmenü, der Browser-Bildschirm, das „Systemkonfiguration“-Menü und der Bildschirm „Grundeinstellung“ angezeigt werden. Englisch Zeigt Meldungen in Englisch an. Französisch Zeigt Meldungen in Französisch an. Spanisch Zeigt Meldungen in Spanisch an. Deutsch Zeigt Meldungen in Deutsch an.
Page 146
Wählen Sie eine Option aus und drücken Sie die Die verfügbaren Optionen werden angezeigt. Wählen Sie die gewünschte Einstellung aus und drücken Sie -Taste. Weitere Informationen dazu finden Sie in den Anweisungen zu den einzelnen Optionen ( Seite 35 bis 36). Anmerkung In den folgenden Erläuterungen sind die Standardeinstellungen unterstrichen.
Page 147
DVD-Spieler Wenn Sie „Progressive-Modus“ auf „Ein“ setzen und die integrierte PlayStation 2 an ein Fernsehgerät ohne die erforderliche Ausstattung anschließen, kann sich die Bildqualität verschlechtern oder es wird möglicherweise gar kein Bild angezeigt. Sie können die Einstellung „Progressive-Modus“ wie unten erläutert deaktivieren. Nehmen Sie vor dem Deaktivieren der Einstellung die DVD heraus.
Page 148
Netzwerkfunktionen Anschließen an ein Netzwerk Sie können Online-Spiele spielen, wenn Sie die PlayStation Breitband-Netzwerk anschließen. Für alle Online-Spiele benötigen Sie Folgendes: • ein netzwerkfähiges PlayStation 2-Spiel • Breitband-Internet-Service • ein handelsübliches Ethernet-Kabel • eine Memory Card (8 MB) (für PlayStation Anmerkungen •...
Page 149
Anschließen der integrierten PlayStation Netzwerkkabel (nicht mitgeliefert) Router An Netzwerkgeräte Netzwerkkabel (nicht mitgeliefert) DSL-Modem/Kabelmodem Schließen Sie das Ethernet-Kabel an den LAN-Anschluss auf der Rückseite an. Schließen Sie das Ethernet-Kabel an das Netzwerkgerät an. Anschließen an ein Netzwerk Anmerkungen • Stecken Sie das Netzkabel erst in eine Netzsteckdose, wenn Sie alle anderen Anschlüsse vorgenommen haben.
Page 150
Vornehmen von Netzwerkeinstellungen Nachdem Sie ein Ethernet-Kabel an die integrierte PlayStation angeschlossen haben, müssen Sie Netzwerkeinstellungen vornehmen und speichern. Dazu benötigen Sie eine Network Access Disc, die Sie erhalten, wenn Sie Ihre PlayStation 2 registrieren. Sie können Ihre PlayStation registrieren. Zum Vornehmen von Netzwerkeinstellungen benötigen Sie Folgendes: –...
Page 151
Índice Preparación Denominación de las piezas... 3 Conexión de un equipo de audio digital ... 5 Conexión del mando ... 6 Encendido y apagado de la PlayStation Juegos Cómo jugar a un juego... 7 Uso de Memory Cards (Tarjetas de Memoria) ... 11 CD audio Reproducción de un CD audio ...
Preparación Denominación de las piezas Parte frontal de la PlayStation Conexión a Descripción 1 Ranura para MEMORY Inserte una Memory Card (Tarjeta de Memoria) CARD 1/2 página 11). 2 Puerto de mando 1/2 Inserte un Mando Analógico (DUALSHOCK®2) en el puerto de mando de la PlayStation página 6).
Page 153
Parte trasera de la PlayStation Conexión a Descripción Puede disfrutar de juegos online si conecta la PlayStation página 36). Nota Para disfrutar de las funciones de la red doméstica “BRAVIA”, conéctese a la LAN del televisor mediante un cable Ethernet ( Denominación de las piezas Conexión a 2 incorporada...
Conexión de un equipo de audio digital Mediante un cable digital óptico disponible en el mercado, puede disfrutar de sonido surround como si estuviera en una sala de cine o de conciertos. Para conectar la PlayStation 2 incorporada al equipo de audio con conectores digitales, consulte las instrucciones suministradas con el dispositivo que va a conectar.
Conexión del mando Inserte un Mando Analógico (DUALSHOCK mando de la PlayStation 2 incorporada. Parte frontal de la PlayStation Mando Analógico (DUALSHOCK Nota Algunos títulos de software recomiendan el uso de un puerto de mando específico. Consulte las instrucciones que acompañan al software para obtener información detallada.
Juegos Cómo jugar a un juego Antes de jugar a un juego Compruebe que las conexiones con el televisor y el equipo de audio son correctas y que se han seguido todas las precauciones. • “Conexión del mando” ( página 6) Nota Para jugar online, debe conectarse primero a una red y configurarla.
Page 157
• Si enciende la PlayStation 2 incorporada después de insertar un disco, el juego se iniciará automáticamente. Para reiniciar un juego Pulse el botón \/1 (encendido/espera)/RESET de la parte frontal de la PlayStation 2 incorporada. Tenga cuidado de no pulsar el botón @/1/ RESET (reinicio) accidentalmente mientras juega, ya que el juego se reiniciará.
Page 158
Botón/interruptor Descripción 5 Joystick analógico Notas izquierdo/Botón L3 • El joystick analógico izquierdo y el botón L3 funcionan sólo en el modo analógico (indicador: rojo). • El botón L3 funciona cuando se pulsa el joystick analógico. 6 Botón modo ANALOG Cambie entre el modo digital y el modo analógico.
Page 159
Acerca de los Mandos Analógicos • Cuando juegue a un título de software de formato PlayStation utilizar todos los botones del modo analógico, excepto los botones START, SELECT, L3 y R3. • Cuando juegue a un título de software de formato PlayStation podrá...
* Este producto ya no se fabrica. MagicGate™ es una tecnología de protección de los derechos de autor, desarrollada por Sony Corporation. Inserción de la Memory Card (Tarjeta de Memoria) Inserte la Memory Card (Tarjeta de Memoria) en una ranura para...
Page 161
Cómo guardar o cargar datos de juego Según el software, el procedimiento para guardar o cargar datos puede variar. Consulte las instrucciones que acompañan al software para obtener información detallada. Cómo copiar o borrar datos de juego También puede borrar datos guardados o copiar datos a otra Memory Card (Tarjeta de Memoria).
CD audio Reproducción de un CD audio Reproducción de un CD Encienda la PlayStation 2 incorporada e inserte el disco página 7). Siga los pasos 1 a 3 de la sección “Inicio del juego”. Se muestran los números de pista. Utilice los botones de dirección para seleccionar el número de pista que desea reproducir y, a continuación, pulse el botón...
Page 163
Finalización de la reproducción de un CD audio Utilice los botones de dirección para seleccionar x y, a continuación, pulse el botón La reproducción se detiene. Pulse el botón OPEN en la parte frontal de la PlayStation 2 incorporada para extraer el disco. Reproducción en diversos modos Puede ajustar las opciones “Modo de Reproducción”...
Reproducción de un DVD Puede utilizar el reproductor de DVD mediante uno de los siguientes métodos. • Mediante el Panel de Control que aparece en la pantalla. • Mediante el Mando Analógico (DUALSHOCK • Mediante el Mando a Distancia de DVD (para PlayStation por separado).
Page 165
Icono Vuelve a la pantalla seleccionada Volver anteriormente dentro del menú del DVD. Muestra y cambia las opciones de audio en Opciones de audio los DVD con múltiples pistas de audio. Muestra y cambia los ángulos de visión en Opciones de DVD grabados con opciones de múltiples ángulo ángulos.
Page 166
Notas • Puede usar “ ” para consultar las opciones a las que puede acceder directamente pulsando los botones del Mando Analógico. Para acceder a las opciones directamente mediante el mando, debe cerrar el Panel de Control para que desaparezca de la pantalla. •...
Page 167
Selección de una escena específica para la reproducción Selección de una escena por el número de capítulo Durante la reproducción, seleccione el número de capítulo que desee en el Panel de Control ( continuación, pulse el botón Se inicia la reproducción del capítulo seleccionado. Si desea reproducir un capítulo con un número de un solo dígito (es decir, 1-9), introduzca un cero delante.
Page 168
Visualización de la información de reproducción Puede visualizar información como el número de título actual o el tiempo transcurrido. Durante la reproducción, seleccione Control ( página 15) y, a continuación, pulse el botón La presentación cambia de la forma que se indica a continuación cada vez que se pulsa el botón Título X Capítulo X...
Uso de los modos de reproducción Mediante los distintos modos de reproducción, puede reproducir títulos o capítulos en el orden que desee o repetir la reproducción de una escena específica. Existen cuatro modos de reproducción: • Reproducción Programada ( página 20). •...
Page 170
Reproducción Aleatoria Puede ajustar esta opción para que se reproduzcan aleatoriamente todos los títulos o capítulos grabados en un disco. El orden de reproducción cambiará cada vez que se utilice la Reproducción Aleatoria. Seleccione en el Panel de Control ( continuación, pulse el botón La presentación cambia de la forma que se indica a continuación cada vez que se pulsa el botón...
Repetición A-B Puede determinar una escena específica para que se reproduzca repetidamente. Durante la reproducción, seleccione Control ( página 15) y, a continuación, pulse el botón en el punto en el que desea iniciar la reproducción repetida. Se establece el punto de partida (punto A). Pulse el botón en el punto en el que desea finalizar la reproducción repetida.
Page 172
Seleccione el elemento deseado y, a continuación, pulse el botón La opción de menú se vuelve activa y se puede seleccionar. Seleccione el ajuste deseado y, a continuación, pulse el botón Se completa el ajuste del elemento. Para obtener información detallada, consulte las instrucciones de cada elemento ( a 28).
Page 173
Ajuste de las opciones de visualización del televisor En el menú Ajuste de la pantalla, puede ajustar el tamaño de la pantalla (formato) y otras opciones que afectan a la calidad de la imagen. Formato TV Puede ajustar el formato para que coincida con el formato de la pantalla. 16:9 Formato de la pantalla: panorámico 4:3 Tipo buzón...
Page 174
Presentación Durante la reproducción, puede visualizar la información de estado de la reproducción en la esquina superior derecha durante varios segundos. Activada La información de estado de la reproducción se muestra durante varios segundos. Desactivada No se muestra la información de estado de la reproducción. Modo progresivo Puede visualizar una imagen cuyas líneas se actualicen de una sola vez.
Page 175
Seleccione “Región” y, a continuación, pulse el botón Se mostrará la lista de opciones de región. Seleccione la región en la que desea basar el nivel de Control paterno y, a continuación, pulse el botón Si selecciona “Otros”, consulte la “Lista de códigos de región” página 26).
Page 176
Utilice los botones de dirección para seleccionar “Cambiar contraseña” y, a continuación, pulse el botón Se mostrará la pantalla para cambiar la contraseña. Seleccione un número y, a continuación, pulse el botón Repita el paso 2 para introducir una contraseña de cuatro dígitos. Debe introducirla una vez más para confirmarla.
Page 177
Dolby Digital Esta opción establece la señal Dolby Digital como el tipo de salida para el conector DIGITAL OUT (OPTICAL). Activada Seleccione esta opción cuando la PlayStation conectada a un dispositivo de audio con un decodificador Dolby Digital incorporado. Desactivada Seleccione esta opción cuando la PlayStation conectada a un dispositivo de audio sin un decodificador Dolby Digital incorporado.
Menú principal Visualización del menú principal Desde el menú principal, puede acceder a información y modificar diversas opciones. También puede acceder a las siguientes pantallas desde el menú principal. El menú principal se muestra cuando se enciende la PlayStation 2 incorporada sin ningún disco insertado. •...
Seleccione un icono y, a continuación, pulse el botón • Al seleccionar el icono de la Memory Card (Tarjeta de Memoria), se mostrarán los iconos de los datos guardados en esa Memory Card (Tarjeta de Memoria). Para copiar o eliminar datos de juego guardados, consulte “Cómo copiar o borrar datos de juego”...
Page 180
Seleccione el ajuste deseado y, a continuación, pulse el botón Para obtener información detallada, consulte las instrucciones de cada elemento de menú ( páginas 31 a 32). Notas • El ajuste predeterminado de cada menú aparece subrayado en las explicaciones más abajo.
Mando a Distancia Ajuste esta opción cuando utilice el Mando a distancia de DVD (para PlayStation 2) (se vende por separado). Función para jugar Seleccione esta opción cuando utilice software de Activada formato PlayStation a distancia de DVD. Función para jugar Seleccione esta opción cuando no utilice software de Desactivada formato PlayStation...
Uso de la pantalla Version Information (Información de versión) Mediante esta opción, puede consultar la información de versión de distintos componentes de la PlayStation 2 incorporada. Asimismo, puede cambiar los ajustes opcionales de algunos elementos. En el menú principal ( página 29), pulse el botón Se muestra la pantalla Version Information (Información de versión).
Page 183
PlayStation Driver Puede ajustar el programa PlayStation rendimiento del software de formato PlayStation Nota La configuración se revertirá automáticamente a los valores predeterminados en el caso siguiente: – Cuando se apaga la PlayStation 2 incorporada Velocidad del Disco Normal Carga discos a velocidad normal. Rápida Carga discos a velocidad alta.
Page 184
Cierre la cubierta del disco. Se inicia la reproducción. Nota La opción no se desactivará si 1) no inicia un DVD tras el paso 4, o 2) reinicia o apaga la PlayStation 2 incorporada antes del paso 6. Uso de la pantalla Version Information (Información de versión)
Page 185
Redes Conexión a una red Puede disfrutar de juegos online conectando la PlayStation banda ancha. Para jugar online, necesita lo siguiente: • Un juego PlayStation 2 que permita jugar en red. • Servicio de Internet de banda ancha. • Un cable Ethernet disponible en el mercado. •...
Page 186
Conexión de la PlayStation 2 incorporada PlayStation Cable de red (no suministrado) Enrutador A los dispositivos de red Cable de red (no suministrado) Módem DSL/Módem por cable Internet Conecte el cable Ethernet al conector de red NETWORK de la parte trasera. Conecte el cable Ethernet en el dispositivo de red.
Page 187
Creación de la configuración de Una vez conectado un cable Ethernet a la PlayStation deberá crear y guardar ajustes de red. Para ello, necesitará un Disco de Acceso a la Red, que recibirá al registrar su PlayStation registrar su PlayStation Para crear un ajuste de red, necesitará...
Page 188
Índice Preparação Nomes das peças ... 3 Ligar equipamento de áudio digital ... 5 Ligar o comando ... 6 Ligar e desligar a PlayStation Jogos Jogar um jogo... 7 Utilizar os Memory Cards (Cartões de Memória) ... 10 CDs Áudio Reproduzir um CD áudio ...
Preparação Nomes das peças Parte da frente da PlayStation Ligar a Descrição 1 Ranhura MEMORY Introduza um memory card (cartão de memória) CARD 1/2 página 11). 2 Porta do comando 1/2 Insira o Comando Analógico (DUALSHOCK®2) numa porta do comando da PlayStation página 6).
Page 190
Parte traseira da PlayStation Nomes das peças Ligar a 2 incorporada 2 DIGITAL AUDIO OUT (OPTICAL) Descrição Pode apreciar jogos online, ligando a PlayStation a uma rede de banda larga ( Nota Para desfrutar das funcionalidades da rede doméstica “BRAVIA”, ligue à LAN do televisor, utilizando um cabo Ethernet ( Pode ouvir o som da PlayStation num sistema Home theatre ligado através da entrada...
Ligar equipamento de áudio digital Utilizando um cabo digital óptico disponível, pode desfrutar do som surround com o efeito de uma sala de cinema ou sala de espectáculos. Ao ligar a PlayStation 2 incorporada ao equipamento de áudio com conectores digitais, consulte as instruções fornecidas com o dispositivo a ser ligado.
Page 192
Ligar o comando Insira o Comando Analógico (DUALSHOCK comando da PlayStation 2 incorporada. Parte da frente da PlayStation Comando Analógico (DUALSHOCK ® Nota Alguns títulos de software designam uma porta do comando específica a ser utilizada. Consulte as instruções fornecidas com o software para mais detalhes. Ligar o comando 2) numa porta do ®...
Jogos Jogar um jogo Antes de jogar um jogo Verifique se as ligações do televisor e do equipamento de áudio estão correctas e se foram seguidas as precauções. • “Ligar o comando” ( página 6) Nota Para jogar jogos online, deve em primeiro lugar ligar e configurar a rede. Consulte “Ligar a uma rede”...
Page 194
Notas • Bloqueie a tampa do disco para reproduzir um disco. • Também pode começar um jogo a partir do ecrã de Rotina de pesquisa página 28). • Caso ligue a PlayStation 2 incorporada depois de inserir um disco, o jogo começa automaticamente.
Page 195
Botão/Interruptor Descrição 5 Manípulo analógico Notas esquerdo/botão L3 • O manípulo analógico esquerdo e o botão L3 funcionam apenas no modo analógico (indicador: vermelho). • O botão L3 funciona quando o manípulo analógico é premido. 6 Botão do modo Alterna entre o modo digital e o modo analógico. ANALOG (analógico) 7 Indicador de modo Modo digital: Apaga-se.
2 suportam a utilização do (SCPH-1020 E)* * Este produto já não é fabricado. MagicGate™ é um termo de tecnologia de protecção de direitos de autor desenvolvido pela Sony Corporation. Software compatível Quantidade de memória Software do formato Cerca de 8 MB...
Page 197
Introduzir o Memory Card (Cartão de Memória) Introduza o Memory Card (Cartão de Memória) na ranhura para o MEMORY CARD na parte da frente da PlayStation Parte da frente da PlayStation MEMORY CARD MEMORY CARD Nota Alguns títulos de software designam uma ranhura MEMORY CARD (Cartão de Memória) específica para utilização.
CDs Áudio Reproduzir um CD áudio Reproduzir um CD Ligue a PlayStation 2 incorporada e insira o disco página 7). Siga os passos 1 a 3 de “Começar um jogo”. Aparece o número da faixa. Utilize os botões de direcções, seleccione o número da faixa que deseja reproduzir e prima o botão A reprodução inicia-se.
Page 199
Reproduzir em vários modos Pode definir para “Modo de Leitura” e “Modo de Repetição”. Modo de Normal Reproduz o CD pela ordem em que foi gravado Leitura Programa Reproduz as faixas numa ordem especificada Alternar Reproduz as faixas numa ordem aleatória Modo de Desligado Não reproduz o CD repetidamente...
DVDs Ver um DVD Pode utilizar o leitor de DVD através dos seguintes métodos. • Utilizar o Painel de Controlo no ecrã • Utilizar directamente através do Comando Analógico (DUALSHOCK ® • Utilizar o Controlo Remoto de DVD (para PlayStation separadamente) As instruções que se seguem pressupõem a utilização do Painel de Controlo para utilizar o leitor de DVD.
Page 201
Ícone Função Regressa ao ecrã anteriormente Voltar Atrás seleccionado no menu do DVD Visualiza e altera as opções de som de Opções de Som DVDs com várias faixas de áudio Apresenta e altera o ângulo de visualização Opções de Ângulo em DVDs gravados com opções de vários ângulos Opções de...
Page 202
Reproduzir um DVD Ligue a PlayStation 2 incorporada e insira um disco página 7). Siga os passos 1 a 3 de “Começar um jogo”. A reprodução inicia-se. Notas • Caso ligue a PlayStation 2 incorporada depois de inserir um disco, a reprodução começa automaticamente.
Page 203
Procurar um ponto em particular num DVD (Busca) Pode procurar para a frente e para trás para localizar rapidamente um ponto em particular num DVD. Durante a reprodução, seleccione Controlo ( página 14) e a seguir mantenha premido o botão A velocidade de busca altera-se conforme é...
Seleccionar Original ou Play List para a reprodução DVD-RW Quando utilizar um disco DVD-RW (modo VR), pode seleccionar o tipo de título que pretende reproduzir. Com a reprodução parada, seleccione Controlo ( página 14) e a seguir prima o botão Original e Play List serão seleccionados alternadamente cada vez que premir o botão Original...
Page 205
Reprodução Programada É possível criar programas para reproduzir títulos e capítulos em qualquer ordem. Durante a reprodução, seleccione Controlo ( página 14) e a seguir prima o botão Seleccione um número de programa e a seguir prima o botão Se não tiverem sido definidos quaisquer programas, a única opção será “1.
Page 206
Reprodução Repetida É possível definir esta opção para reproduzir títulos ou capítulos repetidamente. Seleccione no Painel de Controlo ( prima o botão O visor muda conforme mostrado a seguir e sempre que premir o botão Repetição do Repete a reprodução de todos os títulos disco Repetição de Repete a reprodução de um título...
Ajustar as definições do leitor de Pode utilizar o Painel de Controlo para ajustar as definições do leitor de DVD, tais como o idioma para as legendas, o idioma do som e o nível de Controlo Paternal. Notas • Alguns DVDs não suportam todas as definições. A PlayStation reproduz o conteúdo do disco conforme gravado no software do DVD.
Page 208
Configurar as opções de visualização do televisor No Menu Configurar Ecrã, pode configurar o tamanho do ecrã (relação de aspecto) e outras opções que afectam a qualidade da imagem. Formato Ecrã Pode configurar a relação de aspecto para coincidir com o formato do ecrã. 16:9 Formato do Ecrã: Expandido 4:3 LETTER BOX Formato do Ecrã: 4:3...
Page 209
Visor Durante a reprodução, pode visualizar informações sobre o estado de reprodução no canto superior direito do ecrã durante alguns segundos. As informações sobre o estado da reprodução são visualizadas durante alguns segundos. As informações sobre o estado da reprodução não são visualizadas. Modo Scan Progressivo Pode visualizar uma imagem na qual a imagem actualiza todas as linhas de uma vez.
Page 210
Seleccione a região para a base do nível de Controlo Paternal e prima o botão Se seleccionar “Outros”, consulte “Lista de códigos de região” página 24). Seleccione “Nível” e a seguir prima o botão A lista de opções de nível é visualizada. Seleccione um nível de limitação e a seguir prima o botão Para apagar o Controlo Paternal Com a reprodução do DVD parada, vá...
Page 211
Através dos botões de direcções, seleccione “Alterar código” e prima o botão Aparece o ecrã para alterar o código. Seleccione um número e a seguir prima o botão Repita o passo 2 para introduzir um código de quatro dígitos. É-lhe pedido para introduzir novamente o código para confirmação.
Page 212
Dolby Digital Esta opção define o sinal Dolby Digital como o sinal de saída para o conector DIGITAL OUT (OPTICAL). Seleccione esta opção se a PlayStation a um dispositivo de áudio que tenha um descodificador Dolby Digital incorporado. Seleccione esta opção se a PlayStation a um dispositivo de áudio que não tenha um descodificador Dolby Digital incorporado.
Page 213
Volume do DVD Pode definir esta opção se o nível de saída do som do DVD for baixo. Só pode definir esta função quando “DIGITAL OUT (OPTICAL)” estiver definido para “Off ” em “ÁUDIO SAÍDA DIGITAL” Aumenta o volume (máximo) Aumenta o volume Standard Seleccione normalmente esta opção.
Menu principal Visualizar o menu principal A partir do menu principal, pode aceder às informações e alterar várias definições. Também é possível deslocar-se para os seguintes ecrãs a partir do menu principal. O menu principal é visualizado quando liga a PlayStation 2 incorporada sem um disco inserido.
Seleccione um ícone e a seguir prima o botão • Quando seleccionar o ícone do Memory Card (Cartão de Memória), os ícones para os dados guardados no Memory Card (Cartão de Memória) são visualizados. Para copiar ou eliminar os dados guardados, consulte “Copiar ou eliminar dados de jogos”...
Page 216
Notas • As programações predefinidas para cada item do menu estão sublinhadas nas explicações abaixo. • As alterações a cada programação são guardadas e permanecem em vigor, mesmo quando desliga ou reinicia a PlayStation Ajuste do Relógio É possível ajustar a data e a hora. Utilize os botões de direcções para ajustar o “Ano”, “Mês”, “Dia”, “Hora”, “Minutos”...
Controlo Remoto Pode programar esta opção quando utilizar o Controlo Remoto de DVD (para PlayStation 2) (vendido separadamente). Função Jogar On Seleccione esta opção quando operar software do formato PlayStation 2 ou PlayStation o Controlo Remoto de DVD. Função Jogar Off Seleccione esta opção quando não operar software do formato PlayStation 2 ou PlayStation...
Utilizar o ecrã Informações Sobre a Versão Através da selecção desta opção, é possível verificar as informações sobre a versão de vários componentes da PlayStation pode alterar definições opcionais para alguns itens. No menu principal ( página 28), prima o botão O ecrã...
Page 219
PlayStation Driver Pode ajustar o programa PlayStation Driver para optimizar o desempenho do software do formato PlayStation Nota As definições regressam automaticamente às predefinições nos seguintes casos: – Quando a PlayStation 2 incorporada é desligada Velocidade do Disco Normal Carrega discos à velocidade normal Rápido Carrega discos a grande velocidade Nota...
Page 220
Feche a tampa do disco. A reprodução inicia-se. Nota A definição não será apagada se 1) não iniciar um DVD após o passo 4 ou 2) reiniciar ou desligar a PlayStation 2 incorporada antes do passo 6. Utilizar o ecrã Informações Sobre a Versão...
Page 221
Ligação em rede Ligar a uma rede Pode apreciar jogos online, ligando a PlayStation larga. Para jogar jogos online, precisa do seguinte: • Um jogo PlayStation 2 compatível com rede • Serviço de Internet de banda larga • Um cabo Ethernet disponível no mercado •...
Page 222
Ligar a PlayStation 2 incorporada Cabo de rede (não fornecido) Router Aos dispositivos de rede Cabo de rede (não fornecido) Modem DSL/Modem de cabo Ligue o cabo Ethernet ao conector NETWORK na parte traseira. Ligue o cabo Ethernet ao dispositivo de rede. Ligar a uma rede Notas •...
Page 223
Criar as definições de rede Após ter ligado um cabo Ethernet à PlayStation criar e guardar as definições de rede. Para o fazer, necessita de um disco de acesso à rede, fornecido ao registar a PlayStation PlayStation Para criar uma definição de rede, precisa dos seguintes itens: –...
Page 224
Inhoudsopgave Voorbereiding Onderdelen... 3 Aansluiting op digitale audio-apparatuur... 5 De controller aansluiten ... 5 De ingebouwde PlayStation 2 in- en uitschakelen ... 6 Spelletjes Een spel spelen... 7 Gebruik van Memory Cards (geheugenkaarten)... 10 Audio-CD's Een audio-CD afspelen ... 12 DVD's Een DVD bekijken...
Voorbereiding Onderdelen Ingebouwde PlayStation 2 voorzijde Aansluiten op Beschrijving 1 MEMORY CARD Plaats een memory card ( (geheugenkaart)- aansluiting 1/2 2 Controller-aansluiting Sluit de Analoge Controller (DUALSHOCK®2) aan op een controller-aansluiting van de PlayStation pagina 5). Aansluiten op USB-aansluiting 4 Disc-deksel 5 OPEN-toets 6 "/1 (aan/stand-by)/ RESET-toets...
Page 226
Ingebouwde PlayStation Onderdelen Aansluiten op 2 achterzijde 2 DIGITAL AUDIO OUT (OPTICAL) Beschrijving U kunt online games spelen door de PlayStation aan te sluiten op een breedbandnetwerk pagina 34). Opmerking Om te genieten van "BRAVIA"- thuisnetwerkfuncties maakt u verbinding met het LAN van de TV met behulp van een Ethernet-kabel pagina 34).
Aansluiting op digitale audio- apparatuur Met behulp van een in de handel verkrijgbare optische digitale kabel kunt u genieten van surround sound zoals in een bioscoop of concertzaal. Raadpleeg de gebruiksaanwijzing van het aangesloten toestel wanneer u de ingebouwde PlayStation 2 aansluit op audio-apparatuur met digitale aansluitingen.
De ingebouwde PlayStation in- en uitschakelen Druk op PlayStation 2 POWER ON op de afstandsbediening van de TV om de TV en de PlayStation ingangsmode van de TV wordt automatisch overgeschakeld naar PlayStation Opmerkingen • Als u de TV uitschakelt, wordt de PlayStation PlayStation 2 wordt ook samen met de TV uitgeschakeld als de onderstaande functies worden geactiveerd.
Spelletjes Een spel spelen Voor u een spel speelt Controleer of de console goed is aangesloten op de TV en audio- apparatuur en alle voorzorgsmaatregelen in acht zijn genomen. • "De controller aansluiten" ( pagina 5) Opmerking Om online te kunnen spelen, moet u eerst aangesloten zijn op een netwerk. Zie "Aansluiting op een netwerk"...
Page 230
Opmerkingen • Zorg ervoor dat het disc-deksel gesloten is wanneer u een disc afspeelt. • Een spel kan ook worden gestart via het Browser-scherm ( • Wanneer de ingebouwde PlayStation ingebracht, start het spel automatisch. Een spel herstarten Druk op de \/1 (aan/stand-by)/RESET-toets vooraan op de ingebouwde PlayStation 2.
Page 231
Toets/schakelaar Beschrijving 5 Linker analoge Opmerkingen joystick/ L3-toets • De linker analoge joystick en L3-toets werken alleen in analoge mode (indicator: rood). • De L3-toets werkt alleen als de analoge joystick ingedrukt is. 6 ANALOG-modeknop Schakelen tussen digitale en analoge mode. 7 Mode-indicator Digitale mode: licht niet op.
Memory Card (geheugenkaart) (8MB) (voor PlayStation (SCPH-10020 E) Memory Card (geheugenkaart) (SCPH-1020 E)* * Dit product wordt niet MagicGate™ is een term voor copyrightbeschermingstechnologie ontwikkeld door de Sony Corporation. Compatibele software Software in PlayStation 2-formaat Software in PlayStation -formaat langer gefabriceerd.
Page 233
Een Memory Card (geheugenkaart) plaatsen Steek de Memory Card (geheugenkaart) in een MEMORY CARD (geheugenkaart)-aansluiting aan de voorzijde van de ingebouwde PlayStation Ingebouwde PlayStation 2 voorzijde MEMORY CARD MEMORY CARD Opmerking Bij sommige software moet een specifieke MEMORY CARD (geheugenkaart)- aansluiting worden gebruikt.
Audio-CD's Een audio-CD afspelen Een CD afspelen Schakel de ingebouwde PlayStation pagina 7). Verricht stap 1 t/m 3 van "Een spel starten". De tracknummers verschijnen. Kies het tracknummer dat u wilt beluisteren met behulp van de richtingstoetsen en druk vervolgens op de Het afspelen begint.
Page 235
Afspeelmogelijkheden U kunt kiezen uit "Afspeel modus" en "Herhalen". Afspeel Normaal De tracks worden afgespeeld in de volgorde modus waarop ze op de CD staan Programmeren De tracks worden in een bepaalde volgorde afgespeeld Willekeurige De tracks worden afgespeeld in willekeurige volgorde volgorde Herhalen...
DVD's Een DVD bekijken U kunt de DVD-speler bedienen op de volgende manieren. • Met behulp van het schermbedieningspaneel • Rechtstreeks met behulp van de Analoge Controller (DUALSHOCK • Met behulp van de DVD-Afstandsbediening (voor PlayStation (apart verkrijgbaar) Bij de volgende instructies wordt verondersteld dat de DVD-speler wordt bediend via het schermbedieningspaneel.
Page 237
Pictogram Functie Om terug te keren naar het vorige scherm Terugkeren in het DVD-menu Om de audio opties van DVD's met Audio opties meertalige geluidssporen te tonen en te wijzigen Om de beeldhoekopties te tonen en te Hoekopties wijzigen op DVD's met meerhoeksopties Om de DVD-ondertitelingsopties weer te Ondertitelingsopties geven en te wijzigen...
Page 238
Een DVD afspelen Schakel de ingebouwde PlayStation pagina 7). Verricht stap 1 t/m 3 van "Een spel starten". Het afspelen begint. Opmerkingen • Wanneer de ingebouwde PlayStation ingebracht, start het afspelen automatisch. • De weergave kan ook worden gestart via het Browser-scherm ( De weergave van een DVD beëindigen Selecteer tijdens de weergave x in het bedieningspaneel pagina 14) en druk vervolgens op de...
Page 239
Een bepaald punt op een DVD vinden (Zoeken) U kunt snel voor- of achteruit om een bepaald punt op een DVD te vinden. Selecteer tijdens de weergave bedieningspaneel ( pagina 14) en druk vervolgens op de -toets. De zoeksnelheid verandert zoals hieronder vermeld wanneer u de richtingstoets omhoog of omlaag indrukt terwijl u de ingedrukt houdt.
Original of Play List kiezen voor het afspelen van een DVD-RW Bij een DVD-RW-disc (VR mode) kunt u bepalen welk soort titels u wilt afspelen. Stop de weergave, selecteer bedieningspaneel ( pagina 14) en druk vervolgens op de -toets. Original en Play List worden afwisselend geselecteerd bij elke druk op -toets.
Page 241
Kies een programmanummer en druk vervolgens op de toets. Wanneer er geen programma's zijn ingesteld, is "1. Titel" de enige keuzemogelijkheid. Kies een titelnummer en druk vervolgens op de Kies een hoofdstuknummer en druk vervolgens op de toets. Kies "Alles" om alle hoofdstukken af te spelen. Herhaal stap 2 t/m 4 om andere titels of hoofdstukken te kiezen.
Page 242
Herhaalde weergave U kunt deze optie kiezen om titels of hoofdstukken herhaaldelijk af te spelen. Selecteer in het bedieningspaneel ( druk vervolgens op de -toets. Bij elke druk op de -toets verandert de weergave zoals hieronder vermeld. Disc herhalen Alle titels herhaaldelijk afspelen Titel herhalen Eén titel herhaaldelijk afspelen Hoofdstuk...
De DVD-speler instellen De DVD-speler kan worden ingesteld via het bedieningspaneel (b.v. ondertiteltaal, audiotaal en kinderbeveiliging). Opmerkingen • Sommige DVD's werken niet met alle instellingen. De ingebouwde PlayStation geeft de disc weer zoals die is opgenomen met DVD-software. Wanneer de DVD niet compatibel is met de vermelde functies, kunnen de instellingen niet worden gewijzigd.
Page 244
TV-weergavemogelijkheden instellen Via het menu Scherminstellingen kunt u de breedte/hoogte-verhouding en andere opties instellen die de beeldkwaliteit beïnvloeden. TV Type U kunt de breedte/hoogte-verhouding instellen zodat deze geschikt is voor het schermformaat. 16:9 Schermformaat: breed 4:3 LETTER BOX Schermformaat: 4:3 Deze instelling toont een breedbeeld met zwarte stroken aan de boven- en onderkant van het scherm.
Page 245
Progressief Met deze beeldweergave worden alle beeldlijnen ineens bijgewerkt. Dit geeft meestal een helderder, knippervrij beeld. Progressieve scan (480p)* Geïnterlinieerde scan * De progressive scan mode van de DVD-speler is alleen beschikbaar bij het afspelen van een disc opgenomen in NTSC-indeling en weergave op een televisie die compatibel is met progressive scan (480p).
Page 246
Kies de regio voor het Kinderbeveiligingsniveau en druk vervolgens op de -toets. Indien u "Andere" kiest, zie "Regiocodelijst" ( Kies "Niveau" en druk vervolgens op de De lijst met niveau-opties verschijnt. Kies een beperkingsniveau en druk vervolgens op de toets. Kinderbeveiliging wissen Stop de DVD-weergave, ga naar stap 6 van "Kinderbeveiliging instellen"...
Page 247
Kies een nummer en druk vervolgens op de Herhaal stap 2 om een viercijferig wachtwoord in te voeren. Voer het nogmaals in ter bevestiging. Tijdelijk opheffen van kinderbeveiligingsbeperkingen Start de weergave van de DVD ( pagina 16). U wordt gevraagd het Kinderbeveiligingsniveau tijdelijk te wijzigen om weergave mogelijk te maken.
Page 248
Dolby Digital Deze optie stelt Dolby Digital in als uitvoersignaal voor de DIGITAL OUT (OPTICAL)-aansluiting. Kies deze optie wanneer de ingebouwde PlayStation op audio-apparatuur met ingebouwde Dolby Digital-decoder. Kies deze optie wanneer de ingebouwde PlayStation op audio-apparatuur zonder ingebouwde Dolby Digital-decoder. Deze optie stelt DTS in als uitvoersignaal voor de DIGITAL OUT (OPTICAL)-aansluiting.
Hoofdmenu Hoofdmenuweergave Vanuit het hoofdmenu kunt u informatie opvragen en diverse instellingen wijzigen. U kunt vanuit het hoofdmenu ook naar de volgende schermen gaan. Het hoofdmenu verschijnt wanneer u de ingebouwde PlayStation inschakelt zonder dat er een disc in zit. •...
Kies een pictogram en druk vervolgens op de • Wanneer u het Memory Card (geheugenkaart)-pictogram kiest, verschijnen de pictogrammen voor gegevens op de Memory Card (geheugenkaart). Zie "Spelgegevens kopiëren of wissen" pagina 11) om spelgegevens te kopiëren of te verwijderen. •...
Page 251
Opmerkingen • De standaardinstellingen voor elk menu-item zijn in de aanwijzingen hieronder onderstreept. • Gewijzigde instellingen worden opgeslagen en blijven geldig, ook na het uitschakelen of resetten van de ingebouwde PlayStation Klok instellen U kunt datum en tijd instellen. Gebruik de richtingstoetsen om "Jaar", "Maand", "Dag", "Uren", "Minuten"...
Page 252
Afstandsbediening U kunt deze optie ook instellen bij gebruik van de DVD-afstandsbediening (voor PlayStation 2) (los verkrijgbaar). Spelfunctie Aan Kies deze optie bij gebruik van PlayStation PlayStation afstandsbediening. Spelfunctie Uit Kies deze optie zonder gebruik van PlayStation of PlayStation afstandsbediening. Opmerking De volgende beperkingen gelden wanneer de DVD-afstandsbediening wordt gebruikt met de optie "Spelfunctie Aan":...
Gebruik van het Versie- informatiescherm Met deze optie kunt u de versie van diverse componenten van de ingebouwde PlayStation 2 controleren. Voor sommige items kunnen ook optionele instellingen worden gewijzigd. Druk vanuit het hoofdmenu ( pagina 27) op de Het Versie-informatiescherm verschijnt. Optionele instellingen Optionele instellingen zijn beschikbaar voor "Unit", "PlayStation Driver"...
Page 254
PlayStation Driver U kunt het PlayStation Driver-programma instellen om software in PlayStation -formaat optimaal te laten presteren. Opmerking De instellingen keren automatisch terug naar de standaardinstelling in het volgende geval: – Als de ingebouwde PlayStation 2 wordt uitgeschakeld Disc snelheid Normaal Discs worden met normale snelheid geladen Snel...
Page 255
Sluit het disc-deksel. Het afspelen begint. Opmerking De instelling wordt niet gewist wanneer 1) u geen DVD start na stap 4 of 2) u de ingebouwde PlayStation 2 voor stap 6 reset of uitschakelt. Gebruik van het Versie-informatiescherm...
Page 256
Netwerk Aansluiting op een netwerk U kunt online games spelen door de PlayStation breedbandnetwerk. Om alle online games te spelen, hebt u het volgende nodig: • Een PlayStation 2-spel dat geschikt is voor netwerkgebruik • Breedbandinternet • Een in de handel verkrijgbare Ethernet-kabel •...
Page 257
De ingebouwde PlayStation 2 aansluiten Ingebouwde PlayStation Netwerkkabel (niet meegeleverd) Router Naar netwerkapparaten Netwerkkabel (niet meegeleverd) DSL-modem/kabelmodem Internet Sluit de Ethernet-kabel aan op de NETWORK-aansluiting aan de achterzijde. Sluit de Ethernet-kabel aan op het netwerkapparaat. Opmerkingen • Steek de stekker van het netsnoer pas in een stopcontact nadat u alle andere aansluitingen hebt verricht.
Page 258
Netwerkinstellingen Nadat u een Ethernet-kabel hebt aangesloten op de ingebouwde PlayStation 2, moeten netwerkinstellingen worden verricht en opgeslagen. Hiervoor hebt u een Network Access Disc nodig die wordt geleverd door uw PlayStation 2 te registreren. U kunt uw PlayStation registreren. U hebt de volgende items nodig om netwerkinstellingen te verrichten: –...
Page 259
Работа в сети Подготовительные операции Игры Аудио CD Диски DVD Главное меню...
Page 260
1 Гнездо MEMORY CARD 1/2 2 Порт игрового контроллера 1/2 3 Разъем 4 Крышка отсека для дисков 5 Кнопка OPEN 6 Кнопка "/1 (включение/ожидание)/ RESET OPEN 7 Индикатор "/1 (включение/ожидание) ® Подсказка...
Page 275
Чтобы отключить режим “Возобновление воспроизведения” Выбор сцены по номеру раздела Выбор сцены по номеру главы, раздела или указанию времени...
Page 297
„SONY“ und „ “ sind eingetragene Marken und „MagicGate“ ist eine Marke der Sony Corporation. “ ”, “PlayStation”, “ ”, “DUALSHOCK” y “ “SONY” y “ ” son marcas comerciales registradas y “MagicGate” es una marca comercial de Sony Corporation. “ ”, “PlayStation”, “ ”, “DUALSHOCK” e “...