Step 4 : Connecting To An Ac Power; Step 5 : Setting - Panasonic DMP-BDT100 Operating Instructions Manual

STEP 4 : Connecting to
an AC power
To a household AC outlet
≥ This unit consumes a small amount of AC power ("Quick
Start": "Off", approx. 0.1 W) even when turned off. In the
interest of power conservation, if you will not be using this
unit for an extended period of time, it can be disconnected.
The unit should be installed near an accessible AC
power outlet, with the power cord connected directly to it.
To completely disconnect power from the unit, unplug
the power cord from the AC power outlet.
12
VQT2U33
AC power supply cord
(supplied)

STEP 5 : Setting

Easy Setting
After connecting your new player for the 1st time and
pressing the power button, a screen for the basic settings
will appear.
Preparation
Turn on the television and select the appropriate video
input on the television.
1
Press [Í POWER].
Setup screen appears.
If this unit is connected to a Panasonic TV (VIERA)
supporting HDAVI Control 2 or later via an HDMI cable,
then the setting information on the TV is acquired by this
TV.
2
Follow the on-screen instructions and
make the settings with [3, 4] and press
[OK].
After completing "Easy Setting", you can perform "Network
Easy Setting".
≥ You can perform this setup anytime by selecting "Easy Setting" in the
Setup menu. ( 31)