Panasonic DMP-BD75 Owner's Manual page 23

Video
Black Level Control
Select lighter or darker for adjusting the black level control to
the desired setting for picture enhancement.
Audio
Dynamic Range Compression
You can listen at low volumes but still hear dialog clearly.
(Dolby Digital, Dolby Digital Plus and Dolby TrueHD only)
≥ "Auto" is effective only when playing Dolby TrueHD.
Digital Audio Output
Press [OK] to show the following settings:
Dolby D/Dolby D +/Dolby TrueHD
DTS/DTS-HD
Select the audio signal to output.
≥ Select "PCM", when the connected equipment cannot
decode the respective audio format. This unit decodes
the audio format and transmits to the connected
equipment.
≥ Not making the proper settings may result in noise.
BD-Video Secondary Audio
Select whether to mix or not mix the primary audio and
secondary audio (including the button click sound). (
≥ If "Off" is selected, the unit outputs the primary audio
only.
Downmix
Select the downmix system of multi-channel to 2-channel
sound.
≥ Select "Surround encoded", when the connected
equipment supports the virtual surround function.
≥ There is no effect on "Bitstream" via HDMI AV OUT.
≥ The audio will be output in "Stereo" in the following cases:
– AVCHD playback
– Playback of secondary audio (including the button click
sound).
Display
Status Messages
Choose whether to show status messages automatically.
On-screen Language
Choose the language for menus and on-screen messages.
Screen Saver Function
This is to prevent burn-in on the screen.
≥ When this is set to "On":
If there is no operation for 10 minutes or more, Direct
Navigator screen switches to HOME menu automatically.
≥ While playing and pausing, etc., this function is not
available.
≥ As for Music [CD-DA] or MP3, regardless of the setting, if
there is no operation for a while, Direct Navigator screen
switches to the other states automatically.
Front Panel Display
Changes the brightness of the unit's display.
≥ If "Auto" is selected the display is dimmed during playback
and bright not during playback.
License
Information about the software used by this unit is displayed.
TV / Device Connection
16)
TV Aspect
Set to match the type of television connected.
When connected to a 4:3 aspect television and playing 16:9
ratio image:
The sides are cut off so
the picture fills the screen.
4:3 Pan &
When playing BD-Video,
Scan
video is output as "4:3
Letterbox".
Black bands appear at the
4:3
top and bottom of the
Letterbox
picture.
When connected to a 16:9 widescreen television and
playing 4:3 ratio image:
Video is displayed as a 4:3 ratio image in the
16:9
center of the screen.
Video is displayed as a horizontally
16:9 Full
stretched 16:9 image.
23
VQT3A92