Panasonic TC-23LX60 Operating Instructions Manual page 4

Accessories/Options
Check you have all the items shown.
Accessories
Remote Control Batteries for the Remote
Transmitter Control Transmitter
• •
EUR7613Z90R
Product Registration Card Customer Care Plan Card
(U.S.A.) (U.S.A.)
Installing remote's batteries
push
1
slide open
2
close
Note the correct
polarity (+ or -).
Caution
Please contact your nearest Panasonic
dealer to purchase the recommended wall-
hanging bracket. For additional details,
please refer to the wall-hanging bracket
installation manual.
Wall-hanging bracket
(vertical)
•
TY-WK23LR2W
(TC-23LX60)
•
TY-WK32LR2W
(TC-26LX60C, TC-26LX60L,
TC-32LX60C, TC-32LX60L)
6
AC Plug Converter
(2)
(TC-26LX60L, TC-32LX60L)
AA Battery
Operating Instructions
Warranty Card
(Mexico)
Caution
•
Incorrect installation may cause battery leakage and corrosion,
resulting in damage to the remote control unit.
•
Do not mix old and new batteries.
•
Do not mix different battery types (such as alkaline and
manganese batteries).
•
Do not use rechargeable (Ni-Cd) batteries.
•
Do not burn or break batteries.
•
Make a note of the remote control codes before changing
batteries in case the codes are reset. (p. 23-24)
Optional accessory
WARNING
•
Failure to use a Panasonic bracket or choosing to mount the unit
yourself will be done at the risk of the consumer.
Any damage resulting from not having a professional installer
mount your unit will void your warranty.
•
Always be sure to ask a qualified technician to carry out set-up.
Incorrect fitting may cause equipment to fall, resulting in injury
and product damage.
•
Do not mount this LCD Television directly below ceiling lights
(such as spotlights, floodlights or halogen lights) which typically
give off high heat. Doing so may warp or damage plastic cabinet
parts.
How to remove the TV-Stand
1
Remove two screws
Pull out the plastic portion
Foam mat or thick soft cloth
Receiver Location
Locate at a comfortable distance for viewing. Avoid placing where sunlight or other bright light (including reflections)
will fall on the screen.
Use of some types of fluorescent lighting can reduce remote control transmitter range.
Adequate ventilation is essential to prevent internal component failure. Keep away from areas of excessive heat or
moisture.
How to use the LCD stand
Adjust the stand to your desired angle.
[TC-23LX60]
The stand angle can be adjusted between 5° forward and
10° back, and rotated 20° to the right / left.
[TC-26LX60C / TC-26LX60L / TC-32LX60C / TC-32LX60L]
The stand angle can be rotated 20° to the right / left.
2
Remove four screws
Pull out the metallic portion
7