Indicators; Power Saving Function - Canon Digital IXUS 60 Advance User Manual

Indicators

The camera indicators light or flash under the following
circumstances.
Never do the following while a green indicator is flashing.
These actions may corrupt image data.
- Shake or jolt the camera
- Shut off the power, or open the memory card slot/battery
cover
Upper Indicator
Green:
Blinking Green:
Orange:
Blinking Orange: Ready to shoot (camera shake warning)
Lower Indicator
Yellow:
Blinking Yellow:

Power Saving Function

This camera is equipped with a power saving function. The power
will shut off in the following circumstances. Press the power button
again to restore power.
Shooting Mode
Playback Mode
Connected to a Printer
* This time can be changed.
The power saving function will not activate during a slide
show or while the camera is connected to a computer.
The power saving function settings can be changed
22
Ready to shoot
Image recording/reading/erasing/transferring
(when connected to a computer)
Ready to shoot (flash on)
Macro mode/infinity mode/AF lock mode
Focusing difficulty (camera beeps once)
Powers down approximately 3 minutes after the last
control is accessed on the camera. The LCD monitor
automatically turns off 1 minute* after the last control is
accessed even if [Auto Power Down] is set to [Off].
Press any button other than the power button or change
the camera orientation to turn the LCD monitor back on.
Powers down approximately 5 minutes after the last
control is accessed on the camera.
(p. 29).