Panasonic TC-23LX60 Operating Instructions Manual page 27

HDMI connections to some Panasonic equipment allow you to enjoy easy playback.
•
Set up the equipment to enable this function. Read the manual for the equipment.
•
Switch the TV unit on again with the equipment on when connection or setup is changed.
•
This function may not work normally depending on the equipment condition.
•
The equipment can be operated by TV's remote control with this function on even if TV is in Standby mode.
•
Image or sound may not be available for the first few seconds when the playback starts.
•
Image or sound may not be available for the first few seconds when Input mode is switched.
HDMI (high-definition multimedia interface) allows you to enjoy high-definition digital images and high-quality sound by connecting
the TV unit and the equipment.
HDMI-compatible equipment (*1) with an HDMI or DVI output terminal, such as a set-top box or a DVD player, can be connected
to the HDMI connector using an HDMI compliant (fully wired) cable.
•
HDMI is the world's first complete digital consumer AV interface complying with a non-compression standard.
•
If the external equipment has only a DVI output, connect to the HDMI terminal via a DVI to HDMI adapter cable (*2).
•
When the DVI to HDMI adapter cable is used, connect the audio cable to the audio input terminal.
•
Audio settings can be made on the "HDMI in" menu screen. (p. 12-13)
Applicable audio signal sampling frequencies (L.PCM):
48 kHz, 44.1 kHz, 32 kHz
(*1): The HDMI logo is displayed on an HDMI-compliant equipment.
(*2): Enquire at your local digital equipment retailer shop.
Caution
•
Use with a PC is not assumed.
•
All signals are reformatted before being displayed on the screen.
•
If the connected equipment has an aspect adjustment function, set the aspect ratio to "16:9".
•
This HDMI connector is "type A".
•
Equipment having no digital output terminal may be connected to the input terminal of either "COMPONENT", "S-VIDEO", or
"VIDEO" to receive analog signals.
•
The HDMI input terminal can be used with only the following image signals: 480i, 480p, 720p and 1080i
Match the output setting of the digital equipment.
•
For details of the applicable HDMI signals, see below.
* Mark: Applicable input signal for Component (Y, P
525 (480) / 60i
525 (480) /60p
750 (720) /60p
1,125 (1,080) /60i
Note
•
Signals other than those shown above may not be displayed properly.
•
The above signals are reformatted for optimal viewing on your display.
Control with HDMI "HDAVI Control™"
HDMI connection
Input signals that can be displayed
, P ) and HDMI
B R
horizontal
frequency (kHz) frequency (Hz)
15.73
31.47
45.00
33.75
vertical
COMPONENT
59.94
*
59.94
*
59.94
*
59.94
*
HDMI
*
*
*
*
27