Sony KDL-26E4000 Operating Instructions Manual page 27

AV Set-up
"AV Preset": Assigns a name to any equipment connected to the side and rear
sockets. The name will be displayed briefly on the screen when the equipment is
selected. You can skip an input source that is not connected to any equipment.
1 Press
F f
/ to select the desired input source, then press
2 Press
F f
/ to select the desired option below, then press
• -, CABLE, SAT, VCR, DVD/BD, GAME, AUDIO SYSTEM, CAM, PC: Uses one
of the preset labels to assign a name to connected equipment.
• "Edit:": Creates your own label.
1 Press
F f
/ to select the desired letter or number ("_" for a blank space),
g
then press .
If you input a wrong character:
G g
Press / to select the wrong character. Then, press
character.
2 Repeat the procedure in step 1 until the name is completed.
3 Select "OK", then press
• "Skip": Skips an input source that is not connected to any equipment when you
press F/f to select the input source.
"AV2 Input": Sets a signal to be input through the socket labelled
AV2 on the rear of the TV.
• "Auto": Switches automatically among the signals of RGB input, S video
input, Composite video input depending on the input signal.
• "RGB": Inputs the RGB signal.
• "S Video": Inputs the S Video signal.
• "Composite": Inputs the Composite video signal.
"AV2 Output": Sets a signal to be output through the socket labelled
/ AV2 on the rear of the TV. If you connect a VCR/ DVD recorder or
other recording equipment to the
record from the equipment connected to other sockets of the TV.
• "TV": Outputs a broadcast.
•"Auto": Outputs whatever is being viewed on the screen (except signals from
the HDMI IN 1, HDMI IN 2, HDMI IN 3,
/ PC IN sockets).
"Speaker": Turns on/off the TV's internal speakers.
• "TV Speaker": The TV speakers are turned on in order to listen to the TV's
sound through the TV speakers.
• "Audio System": The TV speakers are turned off in order to listen to the
TV's sound only through your external audio equipment connected to the
audio output sockets. When connected with "Control for HDMI" compatible
equipment, you can turn the connected equipment on interlocked with the TV.
This setting must be made after connecting the equipment.
"Audio Out":
• "Variable": The audio output from your audio system can be controlled by
the TV's remote.
• "Fixed": The audio output of the TV is fixed. Use your audio receiver's
volume control to adjust the volume (and other audio settings) through your
audio system.
z
"Audio Out" is not available for audio system connected to the TV using the HDMI
sockets.
F f
/
.
/ / AV2 socket, you can then
/ COMPONENT IN and
.
.
to select the correct
/ /
/
27
GB