Viewing Pictures From The Connected Equipment - Sony Bravia KDL-32D3000 Operating Instructions Manual

Viewing pictures from
the connected
equipment
Turn on the connected equipment, then
perform one of the following operation.
For equipment connected to the scart sockets using a
fully-wired 21-pin scart lead (page 16)
Start playback on the connected equipment.
The picture from the connected equipment appears on
the screen.
For an auto-tuned VCR (page 6)
In analogue mode, press PROG +/-, or the number
buttons, to select the video channel.
For other connected equipment (page 16)
Press / to display the connected equipment list.
F f
Press / to select the desired input source, then press
. (The highlighted item is selected if 2 seconds pass
without any operation after pressing
When the input source is set to "Skip" in the "AV
Preset" menu under the "AV Set-up" menu (page 27),
that input does not appear in the list.
Additional operations
To
Return to normal TV
mode
Access the Input signal
index table (except TV
mode)
Change the volume of
the connected HDMI
control compatible
audio system
Mute the sound of the
connected HDMI
control compatible
audio system
18
GB
F f
/ .)
Do this
Press DIGITAL or ANALOG.
Press to access the Input
signal index table. To select an
F f
input source, press / , then
press .
2
Press +/-.
%
Press .
Press again to restore.
Using the Tools menu
Press TOOLS to display the following options when
viewing pictures from connected equipment.
Options Description
Close Closes the Tools menu.
Picture Mode (except See page 21.
PC input mode)
Display Mode (in PC See page 21.
input mode only)
Sound Mode See page 23.
Motion Enhancer See page 26.
(except PC input
mode)
Speaker See page 27.
PAP (except PC input See page 18.
mode)
PIP (in PC input See page 19.
mode only)
Auto Adjustment (in See page 30.
PC input mode only)
Horizontal Shift (in See page 30.
PC input mode only)
Vertical Shift (in PC See page 30.
input mode only)
i Volume Adjusts the volume of the
headphones.
Sleep Timer (except See page 28.
PC input mode)
Power Saving See page 28.
Auto Clock Set Allows you to switch to digital
mode and obtain the time.
To view two pictures simultaneously
– PAP (Picture and Picture)
You can view two pictures (external input and TV
programme) on the screen simultaneously.
Connect the optional equipment (page 16), and make
sure that images from the equipment appear on the
screen (page 18).
~
• This function is not available for a PC input source.
• You cannot change the size of the pictures.
• You cannot display analog TV video in the TV
programme picture while displaying AV1, AV2 or AV6
video in the external input picture.
1
Press TOOLS to display the Tools menu.