Removing The Battery - Canon PowerShot G3 User Manual

Removing the Battery

If you ever dispose of your camera, first remove the date battery for
recycling according to the recycling system of your country.
Shooting / Replaying
The wireless controller can be used to shoot or replay. The wireless controller can be
operated from an approximate distance of up to 5 m (16.4 ft.) from the front remote
sensor (w) and approximately 3 m (9.83 ft.) from the side remote sensor (q).
Remote Sensor
Shooting
Press the button on the camera until the
panel, then shoot the image.
To remove the date battery, pull it in the direction
of the arrow.
Transmitter
(1) Compose the image with the zoom buttons.
(2) Press the shutter button.
The camera will shoot the image after the time
set in [Wireless Delay] in the shooting menu has
elapsed (0 seconds, 2 seconds or 10 seconds).
• Each press of this button cycles the LCD
monitor to the next display mode. The order
is LCD monitor on (no display), LCD monitor
on (detailed display) and LCD monitor off.
When the Macro Ring Lite MR-14EX
or the Macro Twin Lite MT-24EX is
mounted on the camera, it will block
the front remote sensor w. In this
case, aim the wireless controller
toward the side remote sensor q.
icon appears in the display
Bij dit produkt zijn batterijen
geleverd. Wanneer deze leeg
zijn, moet u ze niet weggoolen
maar inleveren als KCA
175