Table of Contents
Advertisement
UltraMobilePC
Right Side
Refer to the diagram below to identify the components on this side of the UltraMobilePC.
LAN Port (disabled when using PortBar)
1
The RJ-45 LAN port with eight pins is larger than the RJ-11 modem
port and supports a standard Ethernet cable for connection to a local
network. The built-in connector allows convenient use without addi-
tional adapters.
Note: An active LAN cable must be connected in order for Windows device man-
ager to detect the built-in LAN. For the same reason, an active LAN cable must
be connected when installing a LAN driver.
Expansion Port
2
The expansion port provides an easy-to-use PortBar docking solution to
desktop peripherals and other accessories through a single connector.
Notes: (1) AC power adapter must be used. Cannot be used when UltraMobilePC
is in battery mode. (2) Recommend using two AC power adapters (one on the
UltraMobilePC and one on the PortBar) when using all ports on UltraMobilePC
and PortBar. (3) Disables UltraMobilePC's LAN port when connected.
Display (Monitor) Output (with provided adapter)
The provided VGA adapter for the expansion port will provide a 15-pin D-sub
analog output to support a standard VGA-compatible device such as a monitor
or projector to allow displaying on a larger external monitor.
14
1
2
3
4
5
6
Advertisement
Table of Contents
