BenQ EX800ST Manual page 48

5. To end the connection / broadcasting, click the
device's YouTube screen.
Available on Firmware version v01.00.17.00 or later.
Wireless Hotspot
In situations where the projector is out-of-range of a wireless network (for example while on a
camping trip), you can configure the projector to act as a wireless hotspot to create a closed
network for devices to connect directly to the projector via a wireless connection and to project
files from their local storage.
The projector will have no access to the Internet while in wireless hotspot mode.
To create a wireless hotspot:
1. Install the wireless dongle provide into the wireless dongle port (see
takılması on page 8
2. Power on the projector (see
3. On the home screen of the BenQ Launcher interface select the Settings button and press
OK.
4. Select Hotspot and press OK.
48 Çalıştırma (Launcher kaynağı ile)
).
Projektörün çalıştırılması on page 20
icon on the upper-right corner of your
Kablosuz güvenlik cihazının
).