Specification - LG 42PN4500 Service Manual

NOTE : Specifications and others are subject to change without notice for improvement.
1. Application range
This spec sheet is applied all of the 42" 50", 60" PDP TV with PU31A chassis.
2. Requirement for Test
Each part is tested as below without special appointment.
(1) Temperature: 25 °C ± 5 °C(77 °F ± 9 °F), CST: 40 °C ± 5 °C
(2) Relative Humidity: 65 % ± 10 %
(3) Power Voltage
: Standard input voltage (AC 100-240 V~, 50/60 Hz)
* Standard Voltage of each products is marked by models.
(4) Specification and performance of each parts are followed each drawing and specification by part number in accordance with
BOM.
(5) The receiver must be operated for about 5 minutes prior to the adjustment.
3. Test method
(1) Performance: LGE TV test method followed
(2) Demanded other specification
- Safety : CE, IEC specification
- EMC : CE, IEC
4. Model General Specification
No Item
1 Receiving System
2 Available Channel
3 Input Voltage
4 Market
5 Screen Size
6 Aspect Ratio
7 Tuning System
8 Module
9 Operating Environment
10 Storage Environment
Copyright © LG Electronics. Inc. All rights reserved.
Only for training and service purposes

SPECIFICATION

Specification
1) ATSC / NTSC-M / 64&256 QAM
1) VHF : 02~13
2) UHF : 14~69
3) DTV : 02-69
4) CATV : 01~135
5) CADTV : 01~135
1) AC 100 ~ 240V 50/60Hz
NORTH AMERICA
42 inch Wide(1024 × 768)
50 inch Wide(1024 × 768)
50 inch Wide(1920 × 1080)
60 inch Wide(1920 × 1080)
16:9
FS
PDP42T4#### (1024 × 768)
PDP50T5#### (1024 × 768)
PDP50R5#### (1920 × 1080)
PDP60R5#### (1920 × 1080)
1) Temp : 0 ~ 40 deg
2) Humidity : ~ 80 %
1) Temp : -20 ~ 60 deg
2) Humidity : ~ 85 %
Remark
N.America Mark : 110V, 60Hz
42PN all model
50PN4500 model
50PN6500/50PN5300 model
60PN6500/60PN5300 model
42PN all model
50PN4500 model
50PN6500/50PN5300 model
60PN6500/60PN5300 model
- 4 -
LGE Internal Use Only