Table of Contents
Advertisement
Chapter 1. Getting Started
Cautions
??Using the phone in proximity to receiving equipment (i.e., TV or radio) may cause
interference.
??Keep your phone in a safe place when not in use.
??Only use the batteries, antennas, and chargers provided by LG. Using the wrong
accessories could void your warranty.
??Only authorized personnel should service the phone and its accessories. Faulty installation
or service may result in accidents and consequently invalidate the warranty.
??Do not hold the antenna while the phone is in use.
??Do not use the phone in designated "no cellular phone use" areas.
??Do not expose the phone to high temperature or humidity.
??Avoid getting your phone wet. If the phone gets wet, turn the power off immediately and
remove the battery pack. If the phone is mal-functional, return it to the dealer for service.
??Avoid shock or impact on the phone.
Phone Overview
Function
Lamp
LCD screen
END/PWR
SEND
Mouse Key
Cellcase
Soft Keys
Side Keys
Scroll Keys
Alphanumeric
Keypad
Clear Key
On screen Icons
The phone screen displays several onscreen icons and onscreen icons appears when the phone is
power on.
Icons
The red light goes on when you use the power key to turn on the phone and when there are
incoming calls and messages.
Displays messages & indicator icons.
Used to turn power on/off. This key disconnects a call. Using this key, you can also exit out of
a menu back to the phone's standby display without changing the setting.
Allows user to place or answer calls.
This mouse key allows quick access to text and voice mail notification messages. calendar,
outgoing call log, phonebook Find name.
Close the active cellcase to the terminate a call in progress.
Open the active cellcase to answer an incoming call.
The current operation of a soft key is defined by the word at the bottom of the display.
Soft Keys 2 :
If you press this key once in a menu, you can go back one level and if you press and hold the
key in a menu, you can go back to the standby display.
These keys enable you to adjust keybeep volume (in standby mode) and earpiece volume (in a
call status).
These keys are used to scroll through the memory locations and menu ite ms.
- In the standby status, set the manner mode by pressing the button. (for 2 seconds)
- In the standby status, set the lock function by pressing the button. (for 2 seconds)
These keys enable you to enter numbers and characters and choose menu items.
Displays the strength of the signal received by the phone and current signal
strength is indicated as the number of bars displayed on the screen.
Key Descriptions
Descriptions
Advertisement
Table of Contents
