Westinghouse WSHUJ2258C Instruction Manual page 12

SETTING UP THE HUMIDIFIER
1. Lift off and remove the mist nozzle, water tank cover and mist
condenser stopper.
2. Insert the mist condenser into the mist tube making sure the
UP mark is facing upwards.
NOTE: At the base of the mist tube, water pressure is created
by an ultrasonic atomizer that forces the water upwards to the
top of the mist tube. The mist condenser sits at the top of the
water level in the mist tube and its innovative design changes
the pressurized water into the fine mist that is released through
the mist nozzle. For the mist condenser to work properly, it
must be inserted correctly.
3. Fill the water tank with tap water (no warmer than room
temperature). The tank takes approximately 4L of water. Do
not fill with water above the MAX mark on the water tank or on
the water inlet. Make sure you do not pour water over the mist
tube. Pour it in the water inlet area.
NOTE:
Do not add any sanitizer to the water. Only use tap water in this
humidifier. Do not use distilled water.
4. Reassemble the mist condenser stopper, water tank cover and
mist nozzle.
NOTE: Find a location for the humidifier where the bottom and
sides of the appliance are at least 20 inches away from the
floor, walls, bedding, curtains, furniture, and other objects. Also,
make sure that the top of the humidifier is at least 50 inches of
space above the appliance and that it is at least 80 inches away
from other household electrical appliances, such as a TV.
EN
12
HOW TO USE