Advertisement
Disassembly and Reassembly
3-17 Gear Pick-up ass'y
1. Before you remove the gear pick-up ass'y, you
should remove:
– All covers (see page 3-2, 3-4, 3-5)
Note: When you reassemble the gear, make sure
that the direction of the gear is correct.
3-18 Solenoid
1. Before you remove the solenoid, you should
remove:
– All covers (see page 3-2, 3-4, 3-5)
2. Unplug the connector on the solenoid from the
engine board, remove the one screw, then
remove the solenoid.
3-12
2. Spread out the two snap-fits on the gear to
release the gear, then remove the gear pick-up
ass'y from the main frame.
Samsung Electronics
Advertisement
