Fully Automatic Shooting - Canon DS126061 Instruction Manual

This chapter explains how to use the Basic Zone modes
on the Mode Dial for quick and easy shooting. In each
mode <1> <2> <3> <4> <5> <6> <7>, the AF
mode, drive mode, etc., are set automatically to suit the
subject. In these modes, all you do is point and shoot. In
addition, to help prevent mistakes caused by operating the
camera improperly, the <E> <i> <Q> <S>
<A> buttons and <9> are disabled in these modes. So
you need not worry about accidental errors.
Fully Automatic
Set the Mode Dial to one of
the following modes: <1>
<2> <3> <4> <5> <6>
<7>
¡
The shooting procedure is the
same as for "1Using Full
Auto" (p.40).
¡
To see what is set automatically
in the Basic Zone modes, see
"Function Availability Table"
(p.148).
2
Shooting
39