Troubleshooting - NewAir AWR-520SB Owner's Manual

TROUBLESHOOTING

Problem
The cooler isn't
working.
The cooler is not cold
enough.
The light does not
work.
The cooler vibrates
while operating.
The cooler produces a
lot of noise.
13
Possible Causes
The unit may be
plugged in using a
different voltage.
The circuit breaker may
be tripped or there is a
blown fuse.
The external
environment may
require a higher
setting.
The door may be
opened too frequently.
The door is not closed
completely.
The door seal does not
seal properly.
The front grille is
obstructed.
There may be a
problem with the
display board.
The unit is not sitting
on a level floor, or the
unit's feet are not
correctly installed.
The unit is not leveled.
The fan might be
obstructed.
newair.com
Solution
Check if using the wrong
voltage.
Reset the circuit breaker
or check for a broken
fuse
Lower the temperature
of the cooler.
Open the door less
frequently.
Make sure the door is
closed securely.
Replace the seal on the
door. Replacements can
be acquired from the
manufacturer.
Make sure nothing is
blocking the front grille.
Contact the
manufacturer.
Make sure the unit's
feet are in the proper
position and tightened
securely.
See above.
Check the fan to make
sure there is no debris
or obstruction. If not,
contact the
manufacturer.