Using Your Clock And Timer; Alarm - Philips Xenium X503 Operation User's Manual

To change the ringtone, see "Adjusting ring
settings to different scenes" on Page 61.

Using your clock and timer

Alarm

You can set up to five alarms.
To set an alarm
1. Check that your clock is correctly set (see
"Set clock" on Page 12).
2. Go to Tools > Alarm.
The screen of alarm list appears.
,
3. Select an alarm, and press Edit
the alarm setting screen.
< >
On/Off: Press or to turn the alarm on or
off.
Time: Set the alarm time.
Repeat: Repeat the alarm on one or some of
the weekdays or weekends. Or select
- < >
Customize, press and or
L
certain days, and then press
or unslect the day.
Tools
All manuals and user guides at all-guides.com
Audio options: Select an alarm tone:
FM radio.
To use ringer as the alarm tone, press
L
and then Options
To use FM radio as the alarm tone, press
L
and then Options
station in Channel
station frequency in
Snooze(Mins): Select an alarm interval:
Default (5 minutes), or
Alert type: Select how the alarm sounds at
the set time.
,
to enter
4. Press Done when you finish setting the
alarm.
To use an alarm
On the set alarm time, your alarm sounds.
Select Stop: The alarm stops. If you have selected
repetition mode for the alarm (see "To set an
alarm" on Page 39), it will sound again at the set
to select a
time.
to select
Select Snooze: The alarm will sound again after
the set Snooze(Mins)
Ringer or
-
,
to select a ringtone;
-
,
to select a preset
List, or enter a radio
Manual Input.
1 - 10 minutes.
interval.
39