Table of Contents
Advertisement
For FUJITSU ISIS Scanner Driver
■ Preparation
Prepare the Setup CD-ROM.
■ Installing the FUJITSU ISIS
Scanner Driver
Windows XP screenshots are used in
this section as examples. The
HINT
windows and operations may slightly
vary depending on your OS.
1. Turn on the power of the PC, and log on to Win-
dows.
When using Windows 2000 or
ATTENTION
Windows XP, log on as a user with
"Administrator" rights.
2. Insert the "Setup CD-ROM" into the CD drive.
⇒
<SETUP DISK START UP SCREEN> appears.
This screen may not appear when the
ATTENTION
"Autoplay" setting of your PC is OFF.
In this case, run "Install.exe" in this
CD-ROM directly from the "Explorer"
or "My Computer".
3. Click [INSTALL PRODUCTS].
4. Click [ISIS Driver] on the window below.
5. Select a language used for installation on
[Choose Setup Language] window and click
[OK].
6. Follow the instructions on the window to install
the software.
7. When the [InstallShield Wizard Complete] win-
dow appears, click [Finish].
Your PC will be restarted. Do not remove the Setup CD-
ROM until your PC has completely restarted.
Now the installation of the FUJITSU ISIS scanner driver
is completed.
In order to use the scanner, it is also
necessary to have an application that
HINT
complies with the ISIS standard. You
can install "QuickScan Pro" bundled
with the scanner.
fi-5000N Getting Started
9
Advertisement
Table of Contents
