Switching Between Flash Adjustment Settings - Canon CDI-E075-010 User Manual

Switching between Flash
Adjustment Settings
The built-in flash and the externally mounted flash* fire with automatic flash
adjustments (except in the
without any adjustments.
*Speedlite 220EX/380EX/420EX/550EX, Macro Ring Lite MR-14EX, Macro Twin Lite MT-24EX
1
Select [Flash Adjust] from the [
See Selecting Menus and Settings (p. 42).
2
Select [Auto] or [Manual] and press the
Compensating the Flash Adjustment (
The flash adjustment can be changed when [Flash Adjust] is set to [Auto]. The
settings can be adjusted in 1/3-stop increments in the range of –2EV to +2EV. You
can enjoy flash photography with exposure adjustments with the combined use of
the camera's exposure compensation function.
1
Press the
2
Press the
using the C or D arrow on the omni selector.
3
Select
4
Adjust the compensation using the main
dial or the B or A arrow on the omni
selector.
You can shoot the image right after selecting
settings by pressing the shutter button. This screen
will appear again, once the image is shot.
100
mode), but it is possible to set them so that they fire
button to turn on the LCD monitor.
button.
(Rec.)] menu.
button.
(Flash))
e.g. Flash Adjustment Settings