Table of Contents
Advertisement
SHC-2620 / S
Hedge Trimming
Shoulder Harness (if included)
1.
Loosen harness clamp screw
(A).
2.
Put harness on and attach it to
harness clamp ring (B).
3.
Adjust harness for comfortable
operation.
4.
Tighten harness clamp screw
(A).
Hedge Trimmer blades are very sharp. Touching them may lead
to severe personal injury. Avoid touching blades whenever
possible, and always wear gloves to protect hands.
Never remove hands from unit when blades are moving. The
engine continues running even when the blades have stopped
due to an obstruction. If this occurs, stop the engine,
disconnect ignition cable and remove the obstruction.
1.
Always grip throttle handle with right hand and support handle with left
hand.
2.
Hold trimmer firmly and squeeze throttle trigger to accelerate engine.
3.
Tilt trimmer so cutting teeth are angled slightly toward the hedge or
shrub and proceed to cut.
Gear case becomes extremely hot during use. Wear gloves to
protect hands whenever handling gear case. Otherwise serious
personal injury may result.
X7502342003
© 07/19 ECHO Incorporated
OPERATION
B
A
25
Advertisement
Table of Contents
