THANK YOU FOR SELECTING A QUALITY PRODUCT BY LINCOLN ELECTRIC. SAFETY INSTRUCTIONS WARNING This equipment have to be used by qualified personnel. Be sure that all installation, operation, maintenance and repair procedures are performed only by qualified person. Read and understand this manual before operating this equipment. Failure to follow the instructions in this manual could cause serious personal injury, loss of life, or equipment damage.
IEC 60974-7 specification for welding with steel electrode using the connector. For the best performance is recommended to use these guns GMAW (gas metal arc welding) and gas-shielded FCAW (flux- cored arc with the Lincoln Electric welders, coolers and FREEZCOOL. welding) processes. LINCGUN PROMIG™ guns are manually guided ®...
Using an air hose and only partial pressure, gently blow out the cable liner from the gas diffuser end. Lincoln Electric Europe EU DECLARATION OF CONFORMITY Manufacturer and technical Lincoln Electric Iberia S.L. documentation holder: Ctra. Laureà Miró 396-398 08980 Sant Feliu de Llobregat (Barcelona) Spain This declaration of conformity is issued under the sole responsibility of the manufacturer.
This manual is also suitable for:
Lincgun promig w000345064-2Lincgun promig w000345065-2Lincgun promig w000345069-2Lincgun promig w000345070-2Lincgun promig w000345071-2Lincgun promig w000345075-2...
Show all