To Connect Using Windows Built-In Wireless Utility; In Windows 7 - TP-Link TL-WN951N User Manual

3.3 To connect using Windows built-in wireless utility

3.3.1 In Windows 7

Windows 7 users may use the built-in wireless utility. Follow the steps below.
1. Left-click the wireless icon
display any available wireless networks in your area. Highlight the wireless network
(displayed using the SSID) to be connected and then click Connect.
2. If the network you would like to connect is security-enabled, enter the same security key or
passphrase that is on your router. Or push the QSS button (other brands may call it WPS)
on the router or access point (You will be prompted to push the button on the window if
QSS function is supported as shown in the figure below). If the network to be connected is
not secure, the connection will be built without entering a key.
TL-WN951N 300Mbps Wireless N PCI Adapter
in your system tray (lower-right corner). The utility will
Figure 3-16
17