Table of Contents
Advertisement
1�2
Getting started
1�2�1
Set-up
Inserting or removing the Micro-SIM card
You must insert your Micro-SIM card to make phone calls. Before
inserting/removing the Micro-SIM card, you should ensure the phone
is off, to protect it from corruption or damage.
To install, press the small hole on Micro-SIM card protector by SIM
card tool, and then pull out the SIM card slot. Put the Micro-SIM card
into the slot with chip facing downward, and then pull in the slot.
To remove the card, open Micro-SIM card protector by using SIM
card tool, fetch out SIM card, and then pull in the slot.
Your phone only supports Micro-SIM card. Do not attempt
to insert other SIM types such as mini and nano cards,
otherwise you may damage your phone.
On dual SIM model, both SIM 1 and SIM 2 support 2G &
3G separately, but only one SIM card can connect to 3G
networks at the same time.
6
Charging the battery
Connect the battery charger to your phone and outlet respectively.
If the battery is very low, there will be no indication that
power is being received until the charge is sufficient to show
the charging status bar. To reduce power consumption and
energy waste, once the battery is fully charged, disconnect
your charger from the plug; switch off Wi-Fi, GPS, Bluetooth
or background-running applications when not in use; reduce
the backlight time, etc.
1�2�2
Power on your phone
Hold down the Power key until the phone powers on. It will take a
few seconds before the screen lights up.
Set up your phone for the first time
The first time you power on the phone, you should set the following
options: language, date & time, Google account, etc.
1�2�3
Power off your phone
Hold down the Power key from the Home screen until the Phone
options appear, select Power off.
7
Advertisement
Table of Contents
