Chapter 3
Care and Maintenance of Connectivity Peripherals
This chapter describes how to handle and maintain connectivity peripherals.
Cautions
Please follow the guidelines in the caution box below when handling connectivity
peripherals.
Circuitry in the Point 510 and Point 1600 connectivity peripherals is designed to be
robust; however, the equipment can be damaged if procedures given in this chapter
are not followed regarding the care and maintenance of connectivity peripherals. To
avoid damage to your hardware, observe the following guidelines:
• Disconnect the AC adapter power source to the peripheral prior to cleaning.
• Turn off all connected devices.
• Do not touch connector pins or connector sockets on your equipment. Electrostatic
discharge can damage interface circuitry in your equipment.
• Do not place any part of a connectivity peripheral in water.
• Use only mild detergents and disinfectants on external portions of peripherals.
• Do not apply harsh cleaners directly to any part of a connectivity peripheral.
Caution
3
3-1