Delete All (Menu 2.4); Call Time (Menu 2.5); Call Cost (Menu 2.6) - Samsung SGH-X426 Manual

Call Records
Delete All
(Menu 2.4)
You can delete all of the numbers stored in each call
record.
Select a call record using the Up or Down key and
press the Select soft key. When a confirming
message appears, press the Yes soft key to
confirm.
When you want to delete all of the call records,
select the All Calls option (Menu 2.4.4).
Call Time
(Menu 2.5)
This menu lets you view the timers for calls you
made and received.
Note: The actual time invoiced for calls by your
service provider may vary, depending on
network features, such as rounding-off for
billing purposes.
The following options are available:
Last Call Time: length of the last call.
Total Outgoing: total length of all calls you made
since the timer was last reset.
Total Incoming: total length of all calls you
received since the timer was last reset.
Life Time: total length of all calls you made and
received since the timer was last reset.
Reset Timers: option used to reset the call timers.
You must first enter the phone password and then
press the OK soft key.
Note: The password is preset to "00000000." To
change the password, see page 121.
74
Call Cost
(Menu 2.6)
This feature lets you view the cost of call. This
menu may not be available depending on your SIM
card.
The following options are available:
Last Call Cost: cost of the last call you made.
Total Cost: total cost of all calls you made since
the cost counter was last reset. If the total cost
exceeds the maximum cost set in the Set Max
Cost option, you can no longer make any calls until
you reset the counter.
Max Cost: maximum cost set in the Set Max Cost
option. See below.
Reset Counters: option used to reset the cost
counter. You must first enter your PIN2 (see
page 123) and then press the OK soft key.
Set Max Cost: option used to enter the maximum
cost that you authorize for your calls. PIN2 (see
page 123) and then press the OK soft key.
Price/Unit: option used to set the cost of one unit;
this price per unit is applied when calculating the
cost of your calls. PIN2 (see page 123) and then
press the OK soft key.
Call Records
75