Honda FourTrax Foreman TRX500FM2 2018 Owner's Manual page 233

Installation
1. Position the wheel.
2. Position each wheel nut so that the tapered side faces the wheel
rim (2).
3. Hand-tighten the wheel nuts on the wheel, then lower the ATV
to the ground before tightening the nuts in a crisscross (rather
than circular) pattern to the specified torque:
64 N·m (6.5 kgf·m, 47 lbf·ft)
If a torque wrench was not used for installation, see your dealer as
soon as possible to verify proper assembly. Improper assembly may
lead to loss of braking capability.
If You Have a Flat Tyre
Taking Care of the Unexpected 223