Honda FourTrax Rancher TRX420TM1 2020 Owner's Manual page 221

Emergency Wheel Removal/Installation
Refer to Safety Precautions on page 103.
(1) wheel nuts
Removal
1. Park your ATV on a firm, level surface.
2. Loosen — but do not remove — the wheel nuts (1).
3. Raise the front (or rear) wheels off the ground and place a
support block under the vehicle.
4. Remove the wheel nuts.
5. Remove the wheel.
• Avoid getting grease, oil, or dirt on the front brake disc or pad
surfaces when removing and installing each wheel. Any
contamination can cause poor brake performance or rapid pad
wear after reassembly.
If You Have a Flat Tire
(1)
Taking Care of the Unexpected
(1)
(2)
(2) wheel rim
211