Seat Removal - Honda FourTrax Rancher TRX420TE1 2020 Owner's Manual

Seat Removal

Refer to Safety Precautions on page 103.
The seat must be removed for the air cleaner, engine oil filter, clutch,
spark plug, battery and fuse maintenance and to remove the rear
fender cover and tank cover assembly, to access the owner's
manual, air pressure gauge, gear change tool, tool kit and fuse
puller.
(1) seat latch
(2) seat
(3) front prongs
Removal
1. Pull the seat latch (1) at the rear of the seat.
2. Slide the seat (2) back and lift it.
Installation
1. Insert the front prongs (3) into the hooks (4) on the frame and
press the studs (5) into the grommets (6).
2. Press down on the seat until locks.
114 Servicing Your Honda
(3)
(4)
(2) (5)
(6)
(4) hooks
(5) studs
(6) grommets
(1)