Main Menu - Setting Standard System Parameters - Fujitsu Lifebook S7020 Bios Manual

L i f e B o o k S S e r i e s N o t e b o o k B I O S
MAIN MENU – SETTING STANDARD SYSTEM PARAMETERS
The Main Menu allows you to set or view the current
system parameters. Follow the instructions for Navi-
gating Through The Setup Utility to make any changes.
(See Navigating Through the Setup Utility on page 2 for
more information)
The following tables show the names of the menu fields
for the Main menu and its submenus, all of the options
for each field, the default settings and a description of
Main
System Time:
System Date:
Serial ATA Port 0 [FUJITSU MHT2080BH-SATA]
Primary Master
Language:
F1 Help
ESC Exit
Table 1: Fields, Options and Defaults for the Main Menu
Menu Field Options
System Time: –—
System Date: –—
PhoenixBIOS Setup Utility
Advanced Security
[02:34:56]
[10/24/2005]
[MATSHITADVD-RAM UJ-841S-(PM)]
[English (US)]
Select Item -/Space
Select Menu Enter
Figure 1.
Default
–—
–—
the field's function and any special information needed
to help understand the field's use. Note that the actual
drive labels shown may vary
System time and date can also be set from
your operating system without using the
setup utility. Use the Date and Time icon
on your Windows Control panel or type
time or date from the MS-DOS prompt.
Boot Info Exit
Item Specific Help
Adjust calendar clock.
<Tab>, <Shift-Tab>, or
<Enter> selects field.
Change Values
Select Sub-Menu
Main Menu
Description
Sets and displays the current time. Time is in a 24 hour format
of hours:minutes:seconds with 2 digits for each. (HH:MM:SS).
Example: 16:45:57. You may change each segment of the time
separately. Move between the segments with the [Tab] key and/or
[Shift] + [Tab] keys.
Sets and displays the current date. Date is in a month/day/year
numeric format with 2 digits each for month and day and 4 digits
for year. (MM/DD/YYYY) for example: 03/20/1998. You may
change each segment of the date separately. Move between the
segments with the [Tab] key and/or [Shift] + [Tab] keys.
4
.
F9 Setup Defaults
F10 Save and Exit