Table of Contents
Advertisement
L i f e B o o k S 6 0 0 0 N o t e b o o k
Problem
You have installed an
external keyboard or
mouse, and it does not
seem to work.
(continued)
You have connected an
external keyboard or a
mouse and it seems to be
locking up the system.
Memory Problems
Your Power On screen, or
Main menu of the BIOS
setup utility information,
does not show the correct
amount of installed
memory.
Modem Problems
Messages about modem
operation.
USB Device Problems
You have installed a USB
device. Your LifeBook note-
book does not recognize the
device, or the device does
not seem to work properly.
PC Card Problems
A card inserted in the PC
Card slot does not work or
is locking up the system.
54
Possible Cause
Your operating system
software is not setup with the
correct software driver
for that device.
Your operating system
software is not setup with
the correct software driver
for that device.
Your system has crashed.
Your memory upgrade module
is not properly installed.
You have a memory failure.
Messages about modem
operation are generated by
whichever modem application
is in use.
The device is not
properly installed.
The device may have been
installed while an application
was running, so your notebook
is not aware of its installation.
Your device may not have the
correct software driver active.
The card is not properly
installed.
The card may have been
installed while an application
was running, so your notebook
is not aware of its installation.
Your software may not have
the correct software driver
active.
You may have the wrong I/O
address selected for your PC
Card device.
Possible Solutions
Check your device and operating system docu-
mentation and activate the proper driver.
Check your device and operating system
documentation and activate the proper driver.
Try to restart your notebook.
Remove and re-install your memory upgrade
module. (See Memory Upgrade Module on page 43
for more information)
Check for Power On Self Test (POST) messages.
(See Power On Self Test Messages on page 60 for more
information)
See your application software documentation for
additional information.
Remove and re-install the device. (See Device Ports
on page 45 for more information)
Close the application and restart your notebook.
See your software documentation and activate the
correct driver.
Remove and re-install the card. (See PC Cards on
page 41 for more information)
Close the application and restart your notebook.
See your software documentation and activate the
correct driver.
See your PC Card documentation to determine
the required I/O address. Change the settings in
the BIOS. (See BIOS Setup Utility on page 27 for
more information)
Advertisement
Chapters
Table of Contents
Troubleshooting
