Table of Contents
Advertisement
transmit and receive at the same time. While the PTT Button is
pressed and the TX indicator on the LCD will be display.
Releasing the button allows the unit to revert to standby mode. When
receiving an incoming signal,
The PTT Button can also be used as a two-way call ringer. Pressing the
button twice quickly will call another party on the same channel. The Transmit
icon on the LCD will displayed for 3 seconds and then go out.
Up Channel/Volume Button (10)
In the standby mode, pressing this button will increment the listening
volume. When in function edit mode this button will be used to adjust the
unit's settings.
Down Channel/Volume Button (11)
In the standby mode, pressing this button will decrement the listening
volume. When in function edit mode this button will be used to adjust the
unit's settings.
MODE Button (12)
This button is used to select various feature settings in the GMRS and FRS.
10
128-xxxx
10 of
Advertisement
Table of Contents
