Dvd/Cd-Rw Combo Drive; Dvd/Cd-Rw Combo Drive Software; Loading Media - Fujitsu Lifebook P5020 User Manual

P5020.book Page 34 Friday, September 12, 2003 4:43 PM
L i f e B o o k P 5 0 0 0 N o t e b o o k – S e c t i o n F o u r
DVD/CD-RW
Combo Drive
Your Fujitsu LifeBook notebook may contain a DVD/
CD-RW combo drive. A DVD player gives you access to
movie, software, and audio DVD/CDs. A CD-RW player
allows you to access software or audio CDs, and to write
data onto recordable CDs.

DVD/CD-RW COMBO DRIVE SOFTWARE

With the DVD/CD-RW drive and DVD/CD-RW drive
software you can play DVD movies on your notebook.
The DVD/CD-RW includes controls which allow you to
take full advantage of the features of a DVD movie, as
well as standard features such as fast forward, fast
reverse, pause, etc. With the CD-RW drive, you can read
audio CDs, and write data onto a recordable CD-R or
CD-RW disc.
Prior to using your DVD/CD-RW
■
Combo Drive, you must install the
DVD/CD-RW drive software. Refer to
the applicable readme file on the Appli-
cations CD-ROM for instructions on
installing you DVD/CD-RW Combo
Drive software.
You should periodically check the Fujitsu
■
Web site at www.fujitsupc.com for
current updated drivers.
Do not operate your DVD/CD-RW drive
unless your LifeBook notebook is sitting on
a flat surface. Using a drive when the sys-
tem is not level may damage the drive or
prevent proper operation.
34
Figure 4-3 DVD/CD-RW Combo Drive
Prolonged use of the DVD/CD-RW drive,
such as watching a DVD movie, will
substantially reduce your battery life.
LOADING A DVD, CD, CD-R, OR CD-RW
("MEDIA")
To load a disc into your DVD/CD-RW drive, follow
these steps (Figure 4-4):
1. Push and release the eject button on the front of the
DVD/CD-RW drive to open the holder tray. The
tray will come out of the notebook a short distance.
2. Gently pull the tray out until a media disc can easily
be placed in the tray.
There may be a protective sheet in the tray
from when it was shipped; make sure it is
removed before operating the drive, other-
wise you may damage the drive.
3. Place the media into the tray, label side up, with the
hole in the center of the disc. Snap the disc onto the
raised circle in the center of the tray.
4. Gently push the holder tray back in until you hear a
click.
If you have disabled the Auto Insert Notifi-
cation Function, you will have to start the
drive from your desktop, since your note-
book will not automatically recognize that
media has been loaded.
Media Eject Button
Media Holder Tray