Table of Contents
Advertisement
BOOT MENU – SELECTING THE OPERATING SYSTEM SOURCE
The Boot Menu is used to select the order in which the
BIOS searches sources for the operating system. Follow
the instructions for Navigating Through the Setup
Utility to make any changes. (See Navigating Through
The Setup Utility on page 2 for more information.)
4040M9AT00
ITADVD-RAM UJ-831S
Table 17: Fields, Options and Defaults for the Boot Menu
Menu Field
Options
■
QuickBoot
(Selected)
■
___ (Unselected)
■
Boot-time
(Selected)
Diagnostic
■
___ (Unselected)
Screen
Boot Menu
■
(Selected)
■
___ (Unselected)
■
Preboot
(Selected)
Execution
■
___ (Unselected)
Environment
Boot Sequence
Setting
Quick Boot
__ __
Boot Time Diagnostic Screen
Boot Menu
__ __
Preboot Execution Environment
Boot Sequence Setting
Figure 17. Boot Menu
Default
Description
When selected, fewer Power On Self Tests are run in order to
speed up booting. When unselected, all Power On Self Tests are
run. (Fewer tests mean faster turn on.)
___]
Turns on and off display of test results instead of Fujitsu logo
screen during Power On Self Test.
This field is not active unless the Supervisor's Password has been
set. When unselected, access to the Boot Menu with the [F12] key
is disabled. When selected, the Boot Menu is enabled and the
[F12] key will allow you to display it.
___
Turns on and off the preboot execution environment feature.
___
___
When multiple hard drives are used with the system, this menu
allows setting up the order in which the hard drives are sequenced.
See "Boot Sequence Setting Submenu" in the following section.
B o o t M e n u
The following tables show the names of the menu fields
for the Boot menu and its submenu, all of the options
for each field, the default settings and a description of
the field's function and any special information needed
to help understand the field's use.
CPU
Intel(R) Pentium
Speed:
L1 Cache:
L2 Cache:
17
Advertisement
Table of Contents
