Fujitsu Lifebook N3410 Bios Manual page 19

Table 19: Fields, Options and Defaults for the Boot Device Priority Submenu of the Boot Menu
Menu Field
+Floppy Disk Drive
+Hard Disk Drive
ATAPI CD-ROM Drive
Network Boot
Hard Disk Drive Sequence Submenu of the Boot Menu
The Hard Disk Drive Sequence Submenu is for setting the order in which multiple hard disk drives are sequenced.
Table 20: Fields, Options and Defaults for the Hard Disk Drive Sequence Submenu of the Boot Menu
Menu Field Description
Device Name When more than one hard disk drive is attached to the system, the selection order determines the order in which
. the drives are sequenced during boot up. To change the order, highlight one source by using the [up] or [down]
. cursor keys and then press the [PgUp] or [PgDn] key to change the order number.
.
Device Name
Exiting from Boot Menu
When you have finished setting the boot parameters with the Boot menu, you can either exit from the setup utility or
move to another menu. If you wish to exit from the setup utility press the Esc key then, if you wish to move to another
menu, use the cursor keys.
Description
The boot selections determine the order in which the BIOS searches for the operating system during a startup
sequence. To change the order, highlight one source by using the [up] or [down] cursor keys and then press
the [PgUp] or [PgDn] key to change the order number.
[Network Boot] only appears if [Preboot Execution Environment] is enabled.
NOTE: Be aware that if you use the CD-ROM drive as the first boot device, certain files may be overwritten,
depending upon your operating environment.
__
Boot Menu
Hard Disk Drive Sequence
424040M9AT00
__ __ Pre-Boot Execution Environment
SHITADVD-RAM UJ-831S
Boot Device Priority
x
TOSHIBA MK8025GAS
xx/xx
Hard Disk Drive Sequence
0h - FFFFh
s:
Clear
Clear
rd Is:
Clear
OK
Clear
Figure 20. Hard Disk Drive Sequence Submenu
B o o t M e n u
Intel(R)
Speed:
L1 Cache
L2 Cache
Memory
Total:
Cancel
Slot
Slot
l
19