Fujitsu LifeBook E-6555 User Manual page 33

If you swapped or inserted your Flexible Bay device
with My Computer or Windows Explorer opened,
click View, and then click Refresh.
The Copy Disk utility for the built-in SuperDisk
cannot be used if BayManager is installed. To work
around this limitation, perform the following steps:
(Note that in order to copy SuperDisk media, your
LifeBook notebook's memory size must be greater
than the size of the SuperDisk media.)
Create a folder on your C: drive to which you will
copy the files.
Open the SuperDisk files using my Computer or
Windows Explorer.
Click Edit/Select All.
Copy all all the files to the newly-created folder.
Swap the disk with an empty formatted disk.
Copy all the files from the new folder to the empty
disk.
If BayManager is installed in your LifeBook notebook
and you insert a SuperDisk into its drive on the
Flexible Bay, the disk will indicate Removable Disk on
the screen; this phenomenon does not affect the
LifeBook notebook's operation adversely.
If you are running the optional Adaptec Easy CD
Creator, and want to swap or remove the current
multi-bay device, close Adaptec Easy CD Creator, wait
for about 30 seconds, then do the swapping or
removal.
After you swap or insert your Flexible Bay device, the
DVD Autorun might stop. To work around this
problem, double-click on My Computer, then double-
click the icon for DVD drive.
If a LifeBook notebook with an external USB FDD
connected is put on Standby, the drive letter for the
FDD might change (from A) after the computer is
brought out of the power saving state. This
phenomenon does not affect operations adversely.
If Windows is started on a LifeBook notebook with an
external USB FDD connected, an icon for the FDD
might not appear in My Computer or Windows
Explorer. If you encounter this problem, remove the
FDD from your LifeBook notebook then reconnect it.
If the FDD (A:) is not shown in My Computer or
Windows Explorer even if the FDD is connected,
execute [Insert] by using BayManager.
Hot-swapping under Windows 2000 Professional
Under Windows 2000 Professional, hot-swapping is
provided through the Unplug or Eject Hardware utility.
The icon for the utility appears on the taskbar. Refer to
your Windows manual on using this feature.
G e t t i n g t o K n o w Y o u r L i f e B o o k
25