Miscellaneous Problems - Fujitsu Lifebook E2010 User Manual

Fujitsu lifebook e2010: users guide
Hide thumbs Also See for Lifebook E2010:
Table of Contents

Advertisement

Problem
The Built-in Display does
not close.
The Built-in Display has
bright or dark spots.
You have connected an
external monitor and it
does not come on.
The application display
uses only a portion of your
screen and is surrounded
by a dark frame.
You have connected an
external monitor and it
does not display any
information.

Miscellaneous Problems

An error message is
displayed on the screen
during the operation of
an application.
Possible Cause
A foreign object, such as a
paper clip, is stuck between the
display and the keyboard.
If the spots are very tiny and
few in number, this is normal
for a large LCD display.
If the spots are numerous or
large enough to interfere with
your operation needs.
Your external monitor
is not compatible with
your LifeBook notebook.
You are running an application
that does not support 800 x
600 pixel resolution display
and display compression is
enabled.
Your BIOS setup is not set to
enable your external monitor.
Your external monitor is not
properly installed.
Your operating system soft-
ware is not setup with the
correct software driver for
that device.
Application software often
has its own set of error
message displays.
T r o u b l e s h o o t i n g
Possible Solutions
Remove all foreign objects from the keyboard.
This is normal; do nothing.
Display is faulty; contact your support representative.
See your monitor documentation and the External
Monitor Support portions of the Specifications
section on page 77.
Display compression gives a clearer but smaller
display for applications that do not support 800 x
600 pixel resolution. You can fill the screen but have
less resolution by changing your display compres-
sion setting, (See the Video Features submenu,
located within the Advanced menu of the BIOS.)
(See BIOS Setup Utility on page 31 for more informa-
tion)
Try toggling the video destination by pressing [Fn]
and [F10] together, or check your BIOS setup and
enable your external monitor. (See the Video Features
submenu, located within the Advanced Menu of the
BIOS.) (See BIOS Setup Utility on page 31 for more
information)
Reinstall your device. (See External Monitor Port on
page 52 for more information)
Check your device and operating system
documentation and activate the proper driver.
See your application manual and help displays
screens for more information. Not all messages are
errors some may simply be status.
63

Advertisement

Table of Contents
loading

Table of Contents