Table of Contents
Advertisement
Adjusting Parameters
5. Once the desired parameter setting number is selected, use the "On/Off" button on the controller to
change the selection for that setting number.
Example: Display will change from 01A to 01b for Maximum Temperature setting (as shown below).
6. To
exit
your selection.
7. Default settings are always "A" except Parameters 10, 12, 13, and 14.
© 2015 Rinnai America Corporation
PROPRIETARY and CONFIDENTIAL
the parameter setting mode press the "A" button on the PC board for
Enhancing Lives By Changing The Way Water Is Heated
1
second, this will lock in
5
8/17/2021
Advertisement
Table of Contents
