Hard Disk Security Submenu Of The Security Menu - Fujitsu Lifebook C1410 Bios Manual

L i f e B o o k C S e r i e s B I O S

Hard Disk Security Submenu of the Security Menu

The Hard Disk Security submenu is for configuring hard disk security features.
Main
Drive0:
* Set Master Password
* Set User Password
Drive1:
Set Master Password
Set User Password
Password Entry on Boot:
* Hard Disk Password cannot be set or changed
if the system is rebooted from OS. Choose "Save
Changes and Power Off" in Exit Menu to shut down
the system, then Hard Disk Password can be set
or changed on next boot.
F1 Help
ESC Exit
Table 14: Fields, Options and Defaults for the Hard Disk Security Submenu of the Security Menu
Menu Field Options
Drive0:
___
Set Master ___
Password
Set User Password ___
Drive1:
___
Set Master
___
Password:
22
PhoenixBIOS Setup Utility
Advanced Security Power Savings
Hard Disk Security
Clear
[Enter]
[Enter]
Not Available
[Enter]
[Enter]
[Enabled]
Select Item -/Space Change Values
Select Menu Enter Select
Figure 14. Hard Disk Security Submenu
Default Description
Clear Display-only. Default is Clear. When the Drive0 Password has been set, the field
changes to Set. When this password is set, the primary hard disk drive cannot be
used in another system unless the password is entered.
[Enter] Sets, changes or cancels the Drive0 Master Password. The Drive0 Master Password
may be up to seven characters long and must include only letters or numbers (no
symbols). Passwords are NOT case-sensitive. When a Drive0 Master Password is set,
it must be used to access the hard drive if it is used in another system. Note that the
password will not take effect until the system has been rebooted.
[Enter] Sets, changes or cancels the Drive0 User Password. The Drive0 User Password may
be up to seven characters long and must include only letters or numbers (no sym-
bols). Passwords are NOT case-sensitive. When a Drive0 User Password is set, it
must be used to access the modular hard drive if it is used in another system. Note
that the password will not take effect until the system has been rebooted.
Not Display-only. Default is Not Available. When Drive1 Password has been set, the field
Available changes to Set. When this password is set, the secondary (modular) hard disk drive
cannot be used in another system unless the password is entered.
[Enter] Sets, changes or cancels the Drive1 Master Password. The Drive1 Master Password
may be up to seven characters long and must include only letters or numbers (no
symbols). Passwords are NOT case-sensitive. When a Drive1Master Password is set,
it must be used to access the hard drive if it is used in another system. Note that the
password will not take effect until the system has been rebooted.
Exit
Item Specific Help
F9 Setup Defaults
Sub-Menu F10 Save and Exit