Philips Fidelio SoundRing DS3801W/37 User Manual page 19

Note
‡
If the WI-FI SETUP indicator on DS3801W does not
stay green steadily, it means that the Wi-Fi connection
has failed. Please power off both your Wi-Fi router
and DS3801W and then power on them again to see
whether DS3801W can be connected to your home
Wi-Fi network. If the problem remains, try the above
procedures again.
‡
$IWHU \RX ÀQLVK WKH DERYH FKDQJHV RU SRZHURII DQG
power-on of DS3801W, the new Wi-Fi network
created by DS3801W will disappear.
Tip
‡
If you like, you can change the name of your DS3801W
in Advanced settings -> AirPlay Device Name on the
'6: FRQÀJXUDWLRQ ZHE SDJH 7KLV LV KHOSIXO ZKHQ
you have multiple Philips AirPlay-enabled devices in
your house and you need to distinguish between them.
‡
If you want to enter the network name (SSID) manually
(for example, if you want to hide your SSID), go to
Advanced settings -> CONFIGURE MANUALLY on
WKH '6: FRQÀJXUDWLRQ ZHE SDJH
Restore your Wi-Fi enabled device
back to your existing home Wi-Fi
setting
Note
‡
Make sure that the settings at steps 2 to 3 below match
your home Wi-Fi network settings you wrote on paper.
1
Select Settings -> Wi-Fi on your iPod
touch/iPhone/iPad.
‡ Or open the list of available Wi-Fi
networks on your PC/Mac.
All manuals and user guides at all-guides.com
2
Select your network name (SSID) from the
list of available wireless networks.
3
Enter the network key if required.
4
Wait until successful Wi-Fi connection to
your home Wi-Fi network.
EN 19