Phone Lock
The phone lock protects your phone from unauthorized use. By
default, the phone lock is disabled. Once the phone lock is
enabled, you are required to enter the phone code each time
you power on the phone.
To enable the phone lock, do the following:
Select Menu > Settings > Security settings > Phone
1.
security > Phone lock.
Enter the phone code, and then press
2.
You can change the default phone code (1234) to any numeric
string of four to eight digits.
To change the phone code, do the following:
Select Menu > Settings > Security settings > Phone
1.
security > Change password.
Enter the old phone code, and then press
2.
Enter the new phone code, and then press
3.
Enter the new phone code again to confirm it.
4.
If you forget the phone code, contact the service provider.
Mass Storage
When the phone is connected to a personal computer (PC)
through a USB cable, options such as Mass storage are
displayed on the phone screen.
When you select Mass storage, you can manage the files
stored in the phone memory and on the microSD card.
8
(OK).
(OK).
(OK).