About Ip Addresses - Fujitsu Lifebook B2630 User Manual

L i f e B o o k B S e r i e s – A p p e n d i x
Problem
I want to remove
the driver
(Windows XP)

ABOUT IP ADDRESSES

Setting IP Addresses
If you are not sure how to set the IP address, refer to the
following procedure.
If you have an access point (DHCP server) on the
network, set the IP address as follows:
Windows 2000: [Obtain an IP address automatically]
Windows XP: [Obtain an IP address automatically]
102
Possible Cause
Windows XP:
When removing the driver, make sure that the device is attached to
the computer. If you try to remove the driver while the device is
detached from the computer, the driver is not removed.
1. Click [Start], right click [My Computer], and then click [Properties]
2. Click the [Hardware] tab.
3. Click [Device Manager].
4. Click [+] beside [Network adapters].
5. Right click [Intersil PRISM Wireless LAN PCI Card], and
6. Click [OK].
7. Close [System Properties].
8. Make sure that the icon has disappeared from the task tray in the
9. Click [Start] -> [Control Panel]. [Control Panel] appears.
10. Double-click [Add/Remove Programs]. [Add/Remove Programs]
11. Perform the following steps.
A window appears asking you if you really want to remove the driver.
12. Click [Yes].
When the driver is removed, a window appears showing that the
driver has been removed.
13. Click [OK].
14. Close [Add/Remove Programs] and [Control Panel].
15. Shut down Windows, and turn off the computer.
Possible Solution
from the menu that appears. [System Properties] appears.
click [Uninstall] from the menu that is displayed. [Confirm Device
Removal] appears.
lower right corner of the screen.
appears.
Click [PRISM 11Mbps Wireless LAN for Windows].
Click [Change/Remove].
P O I N T
A DHCP server is a server that automatically assigns IP
addresses to computers or other devices in the network.
There is no DHCP server for the AdHoc network.
If the IP address is already assigned to the computer in
the network, ask the network administrator to check the
IP address to be set for the computer.
If no access point is found in the network: