Fujitsu Lifebook B-2545 Bios Manual page 23

Main
Supervisor Password Is:
User Password Is:
Set Supervisor Password
Set User Password
Minimum User Password Length
Password on Boot:
Boot from Removable Media:
Floppy Disk Access:
Hard Disk Security
Owner Information
Hard Disk Boot Sector:
Security Panel on Resume:
F1 Help
ESC Exit
Table 13: Fields, Options and Defaults for the Security Menu
Menu Field Options
Supervisor –—
Password is:
User Password is: –—
Set Supervisor –—
Password
Set User Password –—
Minimum User –—
Password Length:
PhoenixBIOS Setup Utility
Advanced Security
Clear
Clear
[Enter]
[Enter]
[0]
[Disabled]
[All]
[All]
[Normal]
[Enabled]
Select Item -/Space
Select Menu Enter
Figure 13. Security Menu
Default
Clear
Clear
[Enter]
[Enter]
[0]
Power Boot Info
Item Specific Help
Press <Enter> key to
set Supervisor password
to enable any password
features.
Then password entry is
required to enter BIOS
Setup.
Change Values
Select Sub-Menu
Description
A display-only field. Set is displayed when the system supervisor
password is set and Clear when it is not.
A display-only field. Set is displayed when the general user
password is set, and Clear when it is not.
Sets, changes or cancels the Supervisor Password. The Supervisor
Password may be up to seven characters long and must include
only letters or numbers (no symbols). Passwords are NOT
case- sensitive. To cancel a password press the
entering characters in the Enter New Password field and in the
Re-enter New Password field. When a Supervisor Password is set
it must be used to access the BIOS setup utility.
This field can only be accessed if the Supervisor Password is set.
Sets, changes or cancels the User Password. The User Password
may be up to seven characters long and must include only letters
or numbers (no symbols). Passwords are NOT case-sensitive. To
cancel a password press the
ters in the Enter New Password field and in the Re-enter New Pass-
word field. When a User Password is set it must be used to access
the BIOS setup utility.
–—
S e c i r i t y M e n u
Exit
F9 Setup Defaults
F10 Save and Exit
Enter
Enter
key instead of entering charac-
key instead of
23