Fujitsu LifeBook B-2130 User Manual page 52

Warm-swapping Batteries
To warm-swap batteries in your battery bay follow these
easy steps: (Figure 4-1)
1. Close any open files.
2. Put your notebook into suspend mode
3. Pull back on the Battery Bay release latches and lift
the Battery away from the battery bay.
4. Remove the battery from the bay.
5. Slide the new battery into the bay at an angle.
6. Lay the battery down into the battery bay until it
clicks into place.
7. Press the Suspend/Resume button to return your
notebook to normal operation. You can now access
and use the device.
Your notebook will automatically detect the new device
and activate it within your system. The drive letters
associated with the device will be created and listed
under My Computer and Windows Explorer.
C A U T I O N
If the Lithium Ion battery connector is not fully seated,
you may not be able to use your notebook or charge
your battery.
U s e r I n s t a l l a b l e F e a t u r e s
43